0
LSJ conversion project
Pics of my LSJ engine conversion project. This is the US spec 2.0LSJ supercharged engine with the US ecu, adapted for the VX220/Speedster.
Other Albums by Exmantaa
- 1606
- 0
modified oil cooler adapter
wanted to keep the std VX oil and waterhose layout, so the oil cool...
- 611
- 0
Cleaned panel & new mounts
Needed more space to move the car around, so this one had to move up.
- 912
- 0
Fuel hoses & dual pass connected
All oil and waterhoses connected. SC manifold in, together with som...
- 783
- 0
LSJ Alternator & water tophose
All oil and waterhoses connected. SC manifold in, together with som...
- 628
- 0
All connected, temporary layout
All oil and waterhoses connected. SC manifold in, together with som...
- 778
- 0
Temporary airfilter & MAF tube
All oil and waterhoses connected. SC manifold in, together with som...
- 707
- 0
VXT exhaust fitted and ready to run...
All oil and waterhoses connected. SC manifold in, together with som...
- 641
- 0
First start-up, outside...
All oil and waterhoses connected. SC manifold in, together with som...
- 692
- 0
First drive after clutch bleed
All oil and waterhoses connected. SC manifold in, together with som...
- 747
- 0
Scanning the engine for hunting idle 1
The idle was hunting with intermediate stalling, so let's see w...
- 721
- 0
Scanning for fault codes 1
Yes, still need to connect the IC pump so that is seen as an error...
- 739
- 0
IAT log after short burst
IAT2 (=intake T manifold) reaching 42*C after 1 single short burst...