I'm with Tommobot. Even the rejects are looking good!!
I don't have ANY waist seals, just a half assed attempt someone's done to stick a rubber strip on, doesn't even touch the window. No rear filler rubber either. Looking forward to these. Good job Foxy ðŸ‘
184 replies to this topic
#162
Lee37vernon
-
-
- 106 posts
Member
- Location:Nr Farnham, Surrey
Posted 18 November 2020 - 08:12 PM
I'm with Tommobot. Even the rejects are looking good!!
I don't have ANY waist seals, just a half assed attempt someone's done to stick a rubber strip on, doesn't even touch the window. No rear filler rubber either. Looking forward to these. Good job Foxy ðŸ‘
I don't have ANY waist seals, just a half assed attempt someone's done to stick a rubber strip on, doesn't even touch the window. No rear filler rubber either. Looking forward to these. Good job Foxy ðŸ‘
#163
C8RKH
-
-
- 778 posts
Need to get Out More
- Gender:Male
- Location:UK
Posted 18 November 2020 - 09:38 PM
‘Cucumber’? Or is that Partridge’s? There are so many, I get confused...with interesting consequences...
I like it when you're robust. Just remember my safe word is .......!
Haha! Of course...but I had to respond robustly for the benefit of the audience.
Ah come on, you know me well enough to know I was only taking the proverbial p*ss! You've got a lovely waist there Foxy!
It's going the way of the headlights but not even a light at the end of the tunnel for this one!
That's a bit (lot) unfair! We haven't taken £650 per set, and haven't made (and broken) any promises.
Have seen Partridge (Pigeon?) drive. He has no safe word it is just balls out all the way and let them swing....
I think we have well and truly hi-jacked the low-waist seals thread!
This is why .org will always beat Faceshite.
Edited by C8RKH, 18 November 2020 - 09:41 PM.
#164
Lee37vernon
-
-
- 106 posts
Member
- Location:Nr Farnham, Surrey
Posted 18 November 2020 - 10:06 PM
What waist seals Andy 🤣
#165
Foxy
-
-
- 10,743 posts
I love Nev
- Gender:Male
- Location:Lichfield
Posted 18 November 2020 - 10:34 PM
Have seen Partridge (Pigeon?) drive. He has no safe word it is just balls out all the way and let them swing....
Yes.
Not sure about balls, but he did mention that his knob was dangling through a hole in his boxers...
#166
Aerodynamic
-
-
- 1,455 posts
Billy No Mates
Posted 26 December 2020 - 01:28 PM
Hows it going here?
Br, Per
#167
mark_vx
-
-
- 667 posts
Super Duper Member
- Gender:Male
- Location:Nuneaton
- Interests:Wife and kids, VXs, space, toast - in that order!
Posted 01 January 2021 - 05:15 PM
Am I too late to join the party here? Need a LHS door waist seal
Edited by mark_vx, 01 January 2021 - 05:15 PM.
#168
gertje
-
-
- 458 posts
Super Member
Posted 01 January 2021 - 07:23 PM
I have one, but don't know how the sending is going to be with thé brexit
Verstuurd vanaf mijn ONEPLUS A6003 met Tapatalk
Verstuurd vanaf mijn ONEPLUS A6003 met Tapatalk
#169
seanmooney
-
- 3 posts
Newbie
- Location:Northern Ireland
Posted 08 March 2021 - 02:35 PM
any further developments on this ?
#170
C8RKH
-
-
- 778 posts
Need to get Out More
- Gender:Male
- Location:UK
Posted 08 March 2021 - 06:54 PM
You'll be asking about headlights next? 
#171
Foxy_Jr
-
-
- 478 posts
Super Member
- Gender:Male
- Location:Cheshire
Posted 09 March 2021 - 11:49 AM
You'll be asking about headlights next?
If everyone who's interested wants to send me a couple of hundred quid I'll get the seals in the post..... Eventually! 
#172
FLD
-
-
- 13,717 posts
WANNABE MY LOVER
- Gender:Male
- Location:Near nantwich
- Interests:Tugging my todger.
Posted 09 March 2021 - 12:38 PM
You'll be asking about headlights next?
If everyone who's interested wants to send me a couple of hundred quid I'll get the seals in the post..... Eventually!
You'll need to sell your car and move house first.
#173
FLD
-
-
- 13,717 posts
WANNABE MY LOVER
- Gender:Male
- Location:Near nantwich
- Interests:Tugging my todger.
Posted 09 March 2021 - 12:41 PM
Just a thought....
the afore mentioned house move could be to a village in Nigeria. Hopefully the locals would love you (just as we do) and they would make you a prince. Then you should start a group buy. 
#174
C8RKH
-
-
- 778 posts
Need to get Out More
- Gender:Male
- Location:UK
Posted 09 March 2021 - 10:13 PM
You'll be asking about headlights next?
If everyone who's interested wants to send me a couple of hundred quid I'll get the seals in the post..... Eventually!
Hahahahaha. Love it!
#175
stigg10
-
-
- 140 posts
Member
- Gender:Male
- Location:London
Posted 12 March 2021 - 11:19 PM
Add me to the list too. Mine are fine, bit would be nice to have spares lying around when they do go.
#176
stigg10
-
-
- 140 posts
Member
- Gender:Male
- Location:London
Posted 12 March 2021 - 11:19 PM
<Grr double post bug on Android.>
Edited by stigg10, 12 March 2021 - 11:21 PM.
#177
tommobot
-
-
- 1,007 posts
Need to get Out More
- Gender:Male
- Location:Stratford Upon Avon
Posted 03 June 2021 - 11:44 AM
Couple of months down the line, any closer to these appearing for production?
#178
Lee37vernon
-
-
- 106 posts
Member
- Location:Nr Farnham, Surrey
Posted 03 June 2021 - 02:53 PM
Tommobot, how are your car builder solution ones holding up?
I've got a set of corroded ones coming I'm using the lock end moulding from, then hoping to butt up the CBS ones..
I've got a set of corroded ones coming I'm using the lock end moulding from, then hoping to butt up the CBS ones..
Edited by Lee37vernon, 03 June 2021 - 02:54 PM.
#179
C8RKH
-
-
- 778 posts
Need to get Out More
- Gender:Male
- Location:UK
Posted 03 June 2021 - 06:16 PM
Might be a while. Think Brexit has interrupted the supply chain and of course no cheap labour to sweat over them... Bloody Brexit.
#180
tommobot
-
-
- 1,007 posts
Need to get Out More
- Gender:Male
- Location:Stratford Upon Avon
Posted 03 June 2021 - 08:03 PM
Tommobot, how are your car builder solution ones holding up?
I've got a set of corroded ones coming I'm using the lock end moulding from, then hoping to butt up the CBS ones..
Terrible...
Was ok in the winter when the windows were mainly up, but with the windows down and without the end moulding they just don't stay put....
A bit reluctant to put tape underneath them as the OEM were so much better
Also tagged with one or more of these keywords: group buy
The Market Place →
Group Buy Room →
Nitron Damper Group BuyStarted by Matthew Bentley Racing Ltd , 24 Apr 2018  nitron, group buy, street series and 2 more...
|
|
|
||
The Market Place →
Group Buy Room →
Bilstein Oe Dampers Group BuyStarted by Matthew Bentley Racing Ltd , 04 Dec 2017 bilstein, dampers, group buy and 1 more...
|
|
|
||
The Market Place →
Group Buy Room →
Nitron Street Series Group Buy - Until 20Th Nov 2016Started by Matthew Bentley Racing Ltd , 07 Nov 2016 nitron, group buy, street series and 3 more...
|
|
|
||
The Market Place →
Group Buy Room →
Nitron Street Series Group BuyStarted by Matthew Bentley Racing Ltd , 01 Nov 2015 nitron, street series, group buy
|
|
|
||
The Market Place →
Group Buy Room →
Moto-Oil DiscountStarted by bunsenburner , 29 Jul 2014 engine oil, group buy, discount and 1 more...
|
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
