Hi,
I've just stuck a new gearbox in, and I am not sure whether the splines and C-ring of the drivers side driveshaft have fully gone in. The reason for me querying this is that the gap between the gearbox casting and the green CV joint is 3mm on the passenger side, but 10mm on the drivers side. Is this normal?
I've tried pushing the green shaft housing in/out, but it is reluctant to move any further in, even when using a lever on it. However when I move it up and down or side to side there is a bit of play, as if the shaft splines have not buried themselves deep enough into the differential.
Thanks,
Nev.
Edited by Nev, 13 July 2019 - 05:06 PM.