Just about to fit my GARW digital dash but never taken the dash out or touched it.
Can only find videos on the internet of Lotus, is the procedure the same?
Is there any wires that need cutting or is it literally plug and play? Lotus video shows cutting a few wires.
Thanks
Garw Tips?
Started by
scw02102
, Dec 28 2019 03:58 PM
2 replies to this topic
#1
Posted 28 December 2019 - 03:58 PM
#2
Posted 28 December 2019 - 05:27 PM
Removal is the same, take the column cover off and unscrew the dial pack from the dash including the shroud. Then unbolt the stack from the frame. It's really straightforward once you start.
I ran the prototype mule for a few months and was plug and play but can't comment on the final product because I went back to the stack.
I ran the prototype mule for a few months and was plug and play but can't comment on the final product because I went back to the stack.
Edited by pete-r, 28 December 2019 - 05:28 PM.
#3
Posted 29 December 2019 - 07:57 PM
Thanks, I will give it ago shortly
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users