[quote name="Strugs"
How is Adam? Haven't seen him in years. Used to go to the odd VX meet at the Dog House pub in Abingdon along with the Lotus owners back in the day..[/quote]
Adam and Nat were great, family life has taken over from the VX, I don't think the decision to sell was a light one.
My New Project - Taking Custody Of An Old .org Car
Started by
RyanVince
, Nov 30 2019 08:33 PM
27 replies to this topic
#22
RyanVince
-
-
- 25 posts
Member
- Location:Warwickshire
Posted 31 December 2019 - 08:34 PM
My cheap OBD reader tells me the cam sensor is wrong, I changed the coil pack + plugs and now the crank sensor but the fault is present.
The coils were from ECP so I have sourced 2bd hand or set that is in the post.
What else should I be looking at?
The coils were from ECP so I have sourced 2bd hand or set that is in the post.
What else should I be looking at?
#23
paul_mck
-
-
- 284 posts
Super Member
- Location:NI
Posted 01 January 2020 - 11:37 AM
worth checking the timing is good?
#24
RyanVince
-
-
- 25 posts
Member
- Location:Warwickshire
Posted 02 January 2020 - 08:43 PM
worth checking the timing is good?
How would I do this?
NB I have bought a 2nd hand OE ignition module which should arrive Monday so hope that solves it.
Ryan
#25
RyanVince
-
-
- 25 posts
Member
- Location:Warwickshire
Posted 11 January 2020 - 05:59 PM
MOT Passed 
in the end it was the new but not OE coil pack that was the issue.
#26
RyanVince
-
-
- 25 posts
Member
- Location:Warwickshire
Posted 12 January 2020 - 04:27 PM
T7 heater fitted today
#27
Aerodynamic
-
-
- 1,455 posts
Billy No Mates
Posted 14 January 2020 - 08:15 PM
I want pictures..... :-)
#28
blackoctagon
-
-
- 167 posts
Member
- Gender:Male
- Location:Lothian
Posted 14 January 2020 - 09:51 PM
Hello,
Do you still need an EGR cheater?
I have about 90 sets of parts to build them. I'm happy to put a few sets and a piece of circuit board in an envelope, if you can source some wires and build it up yourself.
Do you still need an EGR cheater?
I have about 90 sets of parts to build them. I'm happy to put a few sets and a piece of circuit board in an envelope, if you can source some wires and build it up yourself.
Edited by blackoctagon, 14 January 2020 - 09:51 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
