Steering Uj
#1
Posted 26 March 2020 - 09:45 AM
Will this part suit?
https://www.elisepar...niversal-joint/
Cheers
Anth
#2
Posted 26 March 2020 - 09:53 AM
from memory the upper side is not able to be split
#3
Posted 26 March 2020 - 10:17 AM
#4
Posted 26 March 2020 - 10:23 AM
ah you know what it is, I bought the EP full shaft with both UJs and the top is welded, oem was 2 x UJs.
#6
Posted 26 March 2020 - 10:41 AM
There are variants on these. Early ones were bolt-on at both ends, later ones are welded at one end. I've not seen one welded at both ends....yet!
#7
Posted 26 March 2020 - 10:55 AM
#8
Posted 26 March 2020 - 11:39 AM
iirc on mine the splines on the shaft had worn, not the UJ
#9
Posted 26 March 2020 - 12:22 PM
have you tried tightening the bolt up as tight as you can? loads of times ive fixed play in the UJ by just giving it a tug and its stopped it even tho it didn't even seem to move the bolt/nut.
#10
Posted 26 March 2020 - 12:51 PM
just giving it a tug
Must resist innuendo...….
#11
Posted 26 March 2020 - 08:02 PM
#12
Posted 04 April 2020 - 03:58 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users