Ap Racing Pro5000+ Anti Rattle Clip For Cp5040 Caliper ?

Can help you out if you haven't sorted the shipping yet.

 

It says upload too big , just one pick , I must done wrong way ....

 

upload to photobucket and post the img code.

 

 

My comp does  not paste  , has a few issues , but now I remember how to post the picks . Cheers mate

Can help you out if you haven't sorted the shipping yet.

 

I will pm you  , cheers mate  .

Can help you out if you haven't sorted the shipping yet.

That would be much appriciated! Guess you found a way to get them to Europe?

 

Can help you out if you haven't sorted the shipping yet.

That would be much appriciated! Guess you found a way to get them to Europe?

 

 

Haven´t been in contact with them but someone mentioned Sweden here. Egor will give it a try with my address so we just have to wait and see.  

 Looks like I have to go to Singapore myself

 Little update !

 

Found the clips on www.part-box.com  Part number CP5200-151 for   28mm disc .

Clips are wider than caliper so need to take off 2mm on both sides .

You have to press on the clip hard and knock the bolt through !

It stopped knocking !

Now it just making sound like I have a buckled disc , bend drive plate or caliper  not in place .

Next step check the drive plate , then disc .....

 

 

 

 Little update !

 

Found the clips on www.part-box.com  Part number CP5200-151 for   28mm disc .

Clips are wider than caliper so need to take off 2mm on both sides .

You have to press on the clip hard and knock the bolt through !

It stopped knocking !

Now it just making sound like I have a buckled disc , bend drive plate or caliper  not in place .

Next step check the drive plate , then disc .....

 

 

 

Hi did this get sorted?

Car in bits needs new engine , so could not give you full report , I honestly believe problem in the disc itself , at least that what I will do next . Have to buy it £330 for one . Do you have a issue with your brakes or just curious ?