Carbon Fibre Gear Lever Suround.
#1
Posted 24 September 2008 - 05:43 PM
List as per vx.org.
1. Nathan, Gear Surround.
2.
Cheers Nathan.
#2
Posted 27 September 2008 - 07:48 AM
#3
Posted 27 September 2008 - 08:02 AM
1. Nathan, Gear Surround.
2. Nikov, Gear Surround (I'd also like door cards, handle guards and dash plates if this chap makes them).
Hi Nikov, yes Scott does the full interior, but it might be prudent to drop him an email with your request.
golf@scottnoon.freeserve.co.uk
Cheers Nathan.
#4
Posted 05 October 2008 - 03:43 PM
#5
Posted 05 October 2008 - 04:00 PM
#6
Posted 06 October 2008 - 05:29 PM
#7
Posted 07 October 2008 - 08:37 AM
1. Nathan, Gear Surround.
2. Nikov, Gear Surround (I'd also like door cards, handle guards and dash plates if this chap makes them).
3.juracing39 gear surround
Juracing39, at your place, i would check that it can be installed in a LHD car.
#8
Posted 07 October 2008 - 09:34 AM
#9
Posted 07 October 2008 - 04:19 PM
#10
Posted 07 October 2008 - 04:30 PM
#11
Posted 08 October 2008 - 06:12 PM
#12
Posted 09 October 2008 - 10:55 AM
#13
Posted 25 October 2008 - 02:53 PM
#14
Posted 25 October 2008 - 10:16 PM
a little off the subject, in the photo, where the centre brace previously was, what have you put to fill hole in dash ?
Is it a light ? where can you get them from ?
Dave
The standard interior light here goes back into the hole once the brace and blanking plate have been removed and plugs straight back into the original loom.
#15
Posted 09 December 2008 - 02:34 PM
#16
Posted 09 December 2008 - 04:38 PM
Hi,
I´m new here (obviously ) and do also want one of those beautiful carbon pieces
I have read the previous "Carbon Fibre Gear Surround" topic, too
but I´m still a bit confused about conditions of this group buy
(please forgive me, if this info is stated somewhere else)...
Is the gear surround actually ready for shipping (no hint on the carbontec site)?
Do we have to wait till enough people are on the group buy list (10,15?)?
Thanks, Rene.
Send a PM to Scottybob, he will be able to help you out.
#17
Posted 18 December 2008 - 09:13 PM
#18
Posted 21 December 2008 - 11:12 AM
these are not being made by "carbontec", its a completely diferent company
Yeah, in the meantime I know that too, I have contacted scott via mail
and now, my very own (LHD) cf gear lever suround is in the works
Should arrives in january ...can´t wait
Rene
#19
Posted 21 December 2008 - 01:18 PM
#20
Posted 21 December 2008 - 06:38 PM
Rene, yours was sent thursday so you might get it before Jan but it depends on the christmas post.
Yes!! Now THAT`S good news
Rene
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users