Inner Cv Joint
#1
Posted 30 August 2011 - 03:28 PM
The car is at the garage, but I was wondering where can I source one cheaply? Motorfactors will be able to get hold of one, but does anyone on here have a spare?
It seems Vauxhall would like me to remortgage the house to finance one, also only being sold complete with outer joint and shaft.
#2
Posted 30 August 2011 - 03:32 PM
#3
Posted 30 August 2011 - 08:08 PM
#4
Posted 30 August 2011 - 08:38 PM
#5
Posted 30 August 2011 - 08:47 PM
Good luck finding an inner joint from anyone other than Vauxhall. I've been trying for 18 months. The Vauxhall inner joint and boot kit is about £200 and is available without the shaft and outer joint.
I found the same Techie. Also found that the only boot worth fitting is the OE Vauxhall kit as all others fall apart. Not cheap at £60 inc either.
#6
Posted 30 August 2011 - 08:48 PM
#7
Posted 31 August 2011 - 11:19 AM
Not good if you have destroyed the bearings
Pm eliz for a replacement used driveshaft?
Thanks - Liz has sorted me out with a replacement.
#8
Posted 01 September 2011 - 07:41 PM
I thought the VX220 CVs are shared with the astra/zafira GSI turbo passenger driveshaft
Therefore the CV boot should be as well... Any news or info on this?
#9
Posted 02 September 2011 - 07:40 AM
I thought the VX220 CVs are shared with the astra/zafira GSI turbo passenger driveshaft
When filtering in EPC - using the part numbers for the VX220 bits, it only comes up with VX220 bits.
Only thing possible is - All the VX220 bits, if you buy the joints, it comes with the boot kit as a kit, can't buy the joints on their own. So perhaps with the GSi bits, you can buy them as just the joint, hence why part number would be different?
I thought the VX220 CVs are shared with the astra/zafira GSI turbo passenger driveshaft
Therefore the CV boot should be as well... Any news or info on this?
Boot kits, inner and outer - EPC says VX220 only.
Not to say one doesn't fit though?
#10
Posted 02 September 2011 - 07:53 AM
I thought the VX220 CVs are shared with the astra/zafira GSI turbo passenger driveshaft
When filtering in EPC - using the part numbers for the VX220 bits, it only comes up with VX220 bits.
Only thing possible is - All the VX220 bits, if you buy the joints, it comes with the boot kit as a kit, can't buy the joints on their own. So perhaps with the GSi bits, you can buy them as just the joint, hence why part number would be different?
I thought the VX220 CVs are shared with the astra/zafira GSI turbo passenger driveshaft
So further homework is needed, well volunteered James.
Therefore the CV boot should be as well... Any news or info on this?
Boot kits, inner and outer - EPC says VX220 only.
Not to say one doesn't fit though?
#11
Posted 02 September 2011 - 08:01 AM
#12
Posted 02 September 2011 - 08:41 AM
Ah, ok.
I'll be in touch when I've done some digging.
Anyone know the dimensions and particulars of VX220 CV joints?
I'm hoping they correlate with some Astra/Zafira GSi CV joints on eBay.
#13
Posted 02 September 2011 - 08:54 AM
However only the gsi turbo versions have a similar (same ?) inner cv as the vx220
I know they are the same length because I measured up the astra driveshafts when doing my 6 speed conversion
a pic nicked from ebay of a set of astra G/zafira A gsi turbo driveshafts
Edited by vocky, 02 September 2011 - 08:56 AM.
#14
Posted 02 September 2011 - 09:01 AM
#15
Posted 02 September 2011 - 09:03 AM
#16
Posted 02 September 2011 - 09:08 AM
I can't find just a boot kit for the Astra/Zafira, it always seems to come with extra bits so the part numbers different.
#17
Posted 02 September 2011 - 09:27 AM
#18
Posted 02 September 2011 - 01:03 PM
Mike, have you now fitted/parted company with those CV boots I sent you the other week?
Not yet. Fitting one tomorrow and the other is to replace one I pinched off VXT'ED at Le Mans.
#19
Posted 02 September 2011 - 01:06 PM
Mike, have you now fitted/parted company with those CV boots I sent you the other week?
Not yet. Fitting one tomorrow and the other is to replace one I pinched off VXT'ED at Le Mans.
Just wondering if there were any part numbers on the individual parts in the kit, that's all.
I think there is on the grease. It'd be nice if there were on the clips and the boot.
#20
Posted 06 September 2011 - 10:28 AM
Mike, have you now fitted/parted company with those CV boots I sent you the other week?
Not yet. Fitting one tomorrow and the other is to replace one I pinched off VXT'ED at Le Mans.
Just wondering if there were any part numbers on the individual parts in the kit, that's all.
I think there is on the grease. It'd be nice if there were on the clips and the boot.
Nothing on the boot or clips James, sorry.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users