62 replies to this topic

[chrisvx220]

Quite a few people have been in contact recently asking for diffusers, I dont currently have any made ready and the fabricator will only make me minimum order batches of 5+ so it looks like its time for another group buy.

These come as standard powder coated black.

They are £170.00 each

Delivery within the UK is £20.00, so £190.00 total.

I have recently recieved quite a bit of interest from over seas too, I did previously provide 10 over to the Netherlands however this was kindly organised by acKra (who did a group buy on the Dutch forum) and we did this as one large crate shipment to avoid damage and keep shipping costs low. This is the prefered method however, if requested I can obtain shipping quotes to send individualy.

I dont use Paypal therefore all payments will be required by a different method i.e. bank transfer, cheque etc.

As stated at the top, these will not go into manufacture until I have 5 confirmed with payment, I will not look to take payments from anyone until the group buy is a definate with 5+ confirmed. The order will at this point be placed and usually takes around 5 weeks give or take + delivery, overseas orders if confirmed early should be feesible to confirm delivery details within the manufacturing time so that they can be delivered very quickly following completion.

Pics to follow

UK
1.
2.
3.
4.
5.

Over Sea's
1.

Edited by chrisvx220, 14 February 2012 - 08:57 AM.

[chrisvx220]

Links to previous buys

http://www.vx220.org...__fromsearch__1

http://www.vx220.org...__fromsearch__1

[chrisvx220]

Ohh almost forgot, please state short or long cut The long protrudes around 2" further than the short, I will post some example pics later as unfortunatly its 9am and I have to start work

[Andrew aka Stuwy]

I am intersted but i was wondering about my pm?

[chrisvx220]

UK
1. Chrisvx220
2.
3.
4.
5.

Over Sea's
1.

[ianrm]

Any comparison pics between the long and short ?

[chrisvx220]

Afraid I only have one pic of the long version which is poor as it was took when my car was filthy but it gives you an idea


Uploaded with ImageShack.us

and short

Edited by chrisvx220, 21 February 2012 - 08:55 AM.

[ianrm]

With my aging eyes it looks like the 1st and 3rd pics are the longer ones ?

[chrisvx220]

3rd pic is a short, think the angle makes it look longer than it actualy is, long would have another couple of inches again on this The short version doesnt realy protrude any further than the upper most part of the clam, the long does protrude further than any part of the rear clam

[Andrew aka Stuwy]

UK
1. Chrisvx220
2. Stuwy Long + Deep
3.
4.
5.

Over Sea's
1.

[WNR-26]

do these replace the complete back undertray section?

[GeorgeBC]

Probably wrong to post a for sale thread on here but mines available for north west people as i cant be arsed send it. Oh and by the way it has a couple of holes extra, all drilled by MMG so it fits. Ill take a ton for it even though id never pay that for it after seeing it . Cant wait to buy a decent one!

[Andrew aka Stuwy]

do these replace the complete back undertray section?

nope just the rear up bit, not the whole undertry

or yes, depending on how I read your question

Edited by Stuwy, 23 February 2012 - 11:53 AM.

[chrisvx220]

Probably wrong to post a for sale thread on here but mines available for north west people as i cant be arsed send it. Oh and by the way it has a couple of holes extra, all drilled by MMG so it fits. Ill take a ton for it even though id never pay that for it after seeing it . Cant wait to buy a decent one!

George, I dont mind so much at the for sale intrusion after all its about the comunity and helping others/getting help in return etc on here if someone is nearby to you and wants yours then by all means however, the way I read your post comes accross a little bashfull and intimates these as being poor quality, that I do find obtrusive and a little out of order!

What puzzles me if you were unhappy with it is why have you not said anything until now, if there were any valid issues and it wasnt up to standard I would have quite happily of replaced it for you, I have 42 out there now on peoples cars not including the multiple for my own, I have recieved numerous possitive comments back and only had 2 that were initially unsatisfactory (one transport damaged & one that was rough around the edges/not smoothed down properly) both of these were exchanged for replacements and possitive feedback recieved from the owners. What are these extra holes you refer too? As you can see below, everything should be cattered for and there are even extra cooling holes over the other diffusers out there.



Maybe I have misunderstood and taken offence at something where non was intended?

[chrisvx220]

do these replace the complete back undertray section?

They do replace the back section with the small fins

[M1VXT]

I have one of Chrisvx220 Diffusers found it easy to fit had to drill 2 holes to line up thats all you must expect some variation on hand built cars. I am 100% satisfied and would recomend them to others.

[chrisvx220]

I have one of Chrisvx220 Diffusers found it easy to fit had to drill 2 holes to line up thats all you must expect some variation on hand built cars.
I am 100% satisfied and would recomend them to others.

Cheers mate, much appreciated

[T_L_P]

UK
1. Chrisvx220
2. Stuwy Long + Deep
3.
4.
5.

Over Sea's
1. T_L_P, Short

[chrisvx220]

UK
1. Chrisvx220
2. Stuwy Long + Deep
3.
4.
5.

Over Sea's
1. T_L_P, Short

T_L_P - Can you PM me your delivery address please mate as I will need to obtain a shipping cost for you cheers

Edited by chrisvx220, 24 February 2012 - 10:23 AM.

[GeorgeBC]

Hi chris i told you at the time about having to re drill and a couple of other bits that i wasn't totally happy about but then they are a good price and do look good on. Ive had somebody asking me about it on PM and ill forward that conversation to you as he is going to buy one and i didn't put him off just explained that i thought the person that made mine was a little lazy, holes not deburred etc Im also buying a different one as i think my car will now suit a longer one now that i have a rear wing. Otherwise i would keep your one. It is important to talk about good and bad points of any product. Your product has far more good reviews than bad so people shouldn't be put off.