Exige Roof And Coupe Back Part Ii
#1
Posted 03 October 2012 - 07:18 PM
Numbers are strictly limited to 8 other cars.
Looks like they will come out around the £750-800 mark..... We're hoping to make these double skin so they use the standard hardtop mounting points (fittings included) but that has to be tested yet, so not sure. Worst case it will be single skin (same as Cliffie's) and a fair chunk cheaper
These can be mounted with Aerocatch or such like fittings so are quickly and easily removed which will mean you can retain your boot as normal. Hardtop can still be removed with the rear in place.
I hope I can get these in a little cheaper than that but what I need is a no bullshit idea as to whether people actually want these as I'm going to have to spend alot of money (which I've not got) to get this project moving.....
For the numbers mentioned, who's in?
1.
2.
3.
4.
5.
6.
7.
8.
#2
Posted 03 October 2012 - 07:28 PM
1. Luke.
2.
3.
4.
5.
6.
7.
8.
#3
Posted 03 October 2012 - 08:05 PM
1. Luke.
2. Chris
3.
4.
5.
6.
7.
8.
#4
Posted 03 October 2012 - 08:20 PM
Edited by leevx2.2, 03 October 2012 - 08:21 PM.
#5
Posted 03 October 2012 - 09:00 PM
#6
Posted 03 October 2012 - 09:03 PM
#7
Posted 03 October 2012 - 10:03 PM
#8
Posted 03 October 2012 - 10:14 PM
#9
Posted 04 October 2012 - 07:34 AM
2. Chris
3. Leevx2.2
4.andywilson
5. Haggi961
6. 2Deano5
7.
8.
#10
Posted 04 October 2012 - 10:17 AM
#11
Posted 04 October 2012 - 10:29 AM
ETA just realised this will be the same as Cliffies. Will the "roll bar" cover section. Is there any was a "T" shaped section could be moulded into the boot lid to put the existing boot catch on the fast back... or use a sacrificial boot lid to chop and bond in.... There are loads of potential hinges too....
http://www.sierragia...ages/Hinges.JPG
http://www.jaccamper...cker_hinges.jpg
As two examples....
Edited by VXed, 04 October 2012 - 10:47 AM.
#12
Posted 04 October 2012 - 05:42 PM
2. Chris
3. Leevx2.2
4.andywilson
5. Haggi961
6. 2Deano5
7. Djerv
8.
#13
Posted 05 October 2012 - 08:57 AM
#14
Posted 05 October 2012 - 11:35 AM
2. Chris
3. Leevx2.2
4.andywilson
5. Haggi961
6. 2Deano5
7. Djerv
8. Bolt666
#16
Posted 09 December 2012 - 10:58 AM
Curious as to which of the 8 will be converted to a hinged version.
Edited by smiley, 09 December 2012 - 10:58 AM.
#17
Posted 09 December 2012 - 11:14 AM
German hinge mechanism.
Curious as to which of the 8 will be converted to a hinged version.
That german one must still work with the roll over cover which our one replaces. That german one looks great but I suspect it's a tad more expensive.
#18
Posted 09 December 2012 - 11:48 AM
#19
Posted 09 December 2012 - 11:55 AM
Yes, 3.5k euro (carbon though)
As the rollbar cover is integrated in yours, it will be more complex to get it hinged. Hence my curiousity.
As the roll bar cover is missing the bar is exposed so should be able to hinge it directy from the roll bar but I've not developed any hinges yet. Should be easy enough though
#20
Posted 09 December 2012 - 12:38 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users