Continued from Part One. . .
Cut through the inner circle of foam, I used a tile saw.
With a sharp knife trim a step for the MDF ring in the outer circle.
Cut it to the depth you want for yours speakers and MDF ring, you can always pack it out later.
Put down a good bead of glue and fit the rings, I used Tiger Seal, allow to cure overnight.
Fit the speakers into the rings with screws, I used some double sided foam for dampening.
Lastly don't forget to fit the wires as you may not be able to when fitted in the car.
How To Fit 5.25" Front Speakers Part Two
Started by
Steelic
, Jan 30 2013 07:08 PM
3 replies to this topic
#1
Posted 30 January 2013 - 07:08 PM
#2
Posted 30 January 2013 - 07:16 PM
Looks great, do you miss the blower much?
Would it have been an option to put some in new holes between the vents?
#3
Posted 30 January 2013 - 07:21 PM
Whoops Mods, maybe you can delete this post as I duplicated by mistake.
#4
Posted 30 January 2013 - 07:27 PM
Looks great, do you miss the blower much?
Would it have been an option to put some in new holes between the vents?
Don't miss it at the sides, it nows blows twice as hard though - much better.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users