

#1
Posted 03 February 2014 - 12:12 AM

#2
Posted 03 February 2014 - 06:26 AM

#3
Posted 03 February 2014 - 10:45 AM
#4
Posted 03 February 2014 - 10:52 AM
I've got the Lotus motorsport rails on mine , and they bolt to the side of the seat. Obviously you lose the adjustment
#5
Posted 03 February 2014 - 11:07 AM
I'm sure there'll be a guide or thread somewhere but I couldn't find it...sorry
Will the Motorsport seat fit to a standard rail/subframe? Any pointers gratefully received as it doesn't seem to be a straight swap.
.
Edited by fiveoclock, 03 February 2014 - 11:07 AM.
#6
Posted 03 February 2014 - 03:06 PM
www.billswebspace.com/Lotus6Pointharness.pdf
Try this it has the motorsport kit on the pdf
Edited by kieranmcc, 03 February 2014 - 03:09 PM.
#7
Posted 03 February 2014 - 03:33 PM
I've got the Lotus motorsport rails on mine , and they bolt to the side of the seat. Obviously you lose the adjustment
Thx. I need to retain the adjustment.
#8
Posted 03 February 2014 - 03:34 PM
Stop faffing about and start driving it!
Getting there! I removed half of Essex from the interior this weekend!
#9
Posted 03 February 2014 - 03:35 PM
I'm sure there'll be a guide or thread somewhere but I couldn't find it...sorry
Will the Motorsport seat fit to a standard rail/subframe? Any pointers gratefully received as it doesn't seem to be a straight swap.
.
Mark?!
#10
Posted 03 February 2014 - 03:35 PM
Eliot is your man on this one
Poke Firthy
Have dropped him a PM
#11
Posted 03 February 2014 - 03:36 PM
Thx ...but I need to retain the std rails.
#12
Posted 03 February 2014 - 03:41 PM
#13
Posted 03 February 2014 - 03:59 PM
Ah, bollocks It doesn't seem far away at all.
Lotus are bashtards...why can't they make these things easy!!
#14
Posted 03 February 2014 - 04:08 PM
#15
Posted 03 February 2014 - 04:16 PM
Hi Foxy,
If you have a Recaro Apex (Lotus Motorsport) or Profi SPG (same seat dimension just different fabric)
You need the following......
FIA Approved Lotus Sport Recaro Seat kit with seat runners*
Part No. - ALS3V6043F
BLS3V6043F - RECARO seat - FIA approved
CLS3V0047F - seat bracket - left
CLS3V0048F - seat bracket - right
A079W4019F - spacers
AO75W1039Z - M8 bolts
AO75W3010Z - M8 nyloc nuts
AO75W4020Z - washer, M8x17x1.6, zinc, seat bracket to seat runner
A082B6057F - grommet
Contact details below.....
[color=#000080;]Adrian Kent[/color][color=#000080;] – Motorsport Stores Controller
LOTUS RACING, Potash Lane, Hethel, Norwich, Norfolk, NR14 8EZ, England
T +44 (0) 1953 608980 akent@lotuscars.com[/color]
[color=#000000;]F +44 (0) 1953 608685[/color][color=#000080;] www.lotuscars.com[/color]
#16
Posted 03 February 2014 - 04:17 PM
It's 5OCs old one. It's probax but from an Elise.
What's all the double shear stuff? From what I've gleaned the inner one is double shear and the outer one can be locked in position. I'm confuddled!
What's to say a lotus subframe will fit in my vauxhall anyway!!
#17
Posted 03 February 2014 - 04:19 PM
Ahh okay different Seat
#18
Posted 03 February 2014 - 04:22 PM
Hi Foxy,
If you have a Recaro Apex (Lotus Motorsport) or Profi SPG (same seat dimension just different fabric)
You need the following......
FIA Approved Lotus Sport Recaro Seat kit with seat runners*
Part No. - ALS3V6043F
BLS3V6043F - RECARO seat - FIA approved
CLS3V0047F - seat bracket - left
CLS3V0048F - seat bracket - right
A079W4019F - spacers
AO75W1039Z - M8 bolts
AO75W3010Z - M8 nyloc nuts
AO75W4020Z - washer, M8x17x1.6, zinc, seat bracket to seat runner
A082B6057F - grommet
Contact details below.....
[color=#000080;]Adrian Kent[/color][color=#000080;] – Motorsport Stores Controller
LOTUS RACING, Potash Lane, Hethel, Norwich, Norfolk, NR14 8EZ, England
T +44 (0) 1953 608980 akent@lotuscars.com[/color]
[color=#000000;]F +44 (0) 1953 608685[/color][color=#000080;] www.lotuscars.com[/color]
Thanks Firthy!!
That looks expensive!! I'll drop Adrian a line
#19
Posted 03 February 2014 - 04:23 PM
Ahh okay different Seat
LOL
The sticker on the bottom says - Express Plastics Ltd (same as VX I think) and Lotus Motorsport.
#20
Posted 03 February 2014 - 04:41 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users