70 replies to this topic

[JG]

I'm going to get the my Bells copied after then seem to work rather well. They remove at least 2kg per corner.

 

They can carry a 288 disc (standard), a 295 disc (standard AP + spacer = the AP upgrade size) amd a 308 disc such as the ones i have on my car now. (See my Project JG thread)

 

Reyand can supply the discs and they are going to make the copies too.

 

I've not got a confirmation on price yet but expect it to be around £180-220 a pair if there are 5 people interested. further discounts availalble if more people are interested

 

They will come anodised and be available in black, silver and gold (:

 

A whole car solution will obviously need two pairs (for which you need two entires on the list)

 

1.JG

 

 

I may take more and then place them in the shop and they can become a Mango Bell

[techieboy]

Mango Bell

 

 

I'm all belled out already but good news that the Reyland rotors fit the AP pattern bells. Though I've still to get through my first set of AP rotors.

[fezzasus]

*anodised

[JG]

That is sort of correct Matt.

 

AP used this bell for their 295 kit but used one with a larger PCD for the 308s.

 

We're using the same bell for all disc sizes as the rotors are now available for all thee sizes.

 

I want a set so i can use a 288 on the rear.

 

 

[CocoPops]

Yes please.

[JG]

*anodised

 

Thank you kind sir

[chris_uk]

[color=rgb(40,40,40);font-family:helvetica, arial, sans-serif;]1.JG[/color]

[color=rgb(40,40,40);font-family:helvetica, arial, sans-serif;]2. Chris_uk (1 pair 308mm + 1 Pair 288mm in black)[/color]

[JG]

[font="helvetica, arial, sans-serif;color:rgb(40,40,40);"]1.JG (silver)[/font]

[font="helvetica, arial, sans-serif;color:rgb(40,40,40);"]2. Chris_uk (Black)[/font]

[font="helvetica, arial, sans-serif;color:rgb(40,40,40);"][font="helvetica, arial, sans-serif;color:rgb(40,40,40);"]3. Chris_uk (Black)[/font][/font]

[font="helvetica, arial, sans-serif;color:rgb(40,40,40);"][font="helvetica, arial, sans-serif;color:rgb(40,40,40);"]4. Coco (Silver)[/font][/font]

 

 

[techieboy]

That is sort of correct Matt.

Would rather stick with my 295mm front rotors and not bother with blingtastic 308's with dirty great caliper spacers anyway, so that's good. Got the EP bells on the back with their (EBC) 288mm rotors.

[The Batman]

Me please. With 288 and 308 rotors if you are getting discount on them

[chris_uk]

Me please. With 288 and 308 rotors if you are getting discount on them

 

me aswell.

[fezzasus]

lol Joe! I'm pretty certain he's only doing this so he can get the pair you have

[The Batman]

He has the pair I sent then to him for him to match them up!

[rizo9]

How much for the discs and bells?

[Denthrax]

Also interested

[JG]

Ah yes, I didn't think about this very carefully did i, we might as well get a discount for the rotors while we are there. This sounds like I'm organising a proper group buy and I'm still licking my wounds from the last one. Oh well let's see how it goes. Right then. 1. JG - silver - 288 rotors 2. Chris_uk - black - 308 3. Chris_uk - black - 288 4. Coco - silver - 288 5. joe - silver? - 288 Also need a set of 308s for joe and a set of 295s for lee without bells.

[Tony H]

How do these compare to others like eliseparts price & spec wise?

[JG]

In the interest of time, this isn't going to be open for very long, I recall a tullet gb that lasted 2 days and that was perfect. Let's say open until Monday evening, that gives everyone a chance to see it. I'll have confirmed pricing by then, and will expect anyone on the gb to pay then ready for me to place an order on the Tuesday morning. I'll be looking to get a discount on the rotors too obviously.

[rizo9]

Can you do 308 on standard calipers?

[JG]

How do these compare to others like eliseparts price & spec wise?

Good question. No comparison really for the 308s other than aps which are 2.5 times more expensive for very little additional weight saving. They have a neater cooling duct system and are probably made of better iron. Worth 2.5times more? That's your call. Same goes for the 295s For the 288s they have this package https://www.elisepar...elled-discs-s2/ Pretty sensibly priced (remembering that's +vat), but the bell can only be used with that disc combination whereas this is a bit more flexible, I don't think we'll be far off the price too.