5 replies to this topic

[sford]

I'm going through the process of changing to a lightweight flywheel and new clutch but wondered what bolts I needed. Specifically the fly wheel bolts, EP mention ARP ones however can't find them on the site. Went on the ARP site and they aren't listed specifically for the z22se. I presume these ones hold the flywheel to the crank. I also have some bolt threads sticking out from the outer part of the flywheel which appear on other installs I've seen to have brass coloured nuts on them, where do I get these? 

 

I've got Nev's guide which looks to cover the entire process pretty well. I am planning to get all of the parts together before carry out the work. 

 

Thanks in advance.

 

Tom

 

 

 

 

[vocky]

get some thread locking compound and re-use the original crank bolts, the outer clutch cover needs M8 nuts and three holes need enlarging to 8.0mm

 

http://www.halfords....te-threadlocker

 

http://www.ebay.co.u...gsAAOSwr81UO9nw

[tommobot]

I got new bolts for the flywheel from Vauxhall directly, from what I remember they weren't very expensive

[Rosssco]

Not sure why you need ARP bolts? Unless you're running extreme engine torque and a very strong clutch..

[sford]

EP website said to.

 

Thanks for all the pointers guys. 

[CHILL Gone DUTCH]

There cheap enough ffom Vauxhall