Noisy Evac Valve At Low Rpm After Supercharge
#1
Posted 14 September 2016 - 07:37 PM
#2
Posted 14 September 2016 - 10:11 PM
#3
Posted 15 September 2016 - 07:37 AM
Cheers Jim, it is very annoying. Sounds like when I was a kid and I used to put a playing cards between the spokes of my bike 🙁Nothing to worry about just a bit annoying 😠 mine was noisy after s/c conversion - removed cleaned through with brake cleaner aerosol ( put temporary 12v to open valve first ) and loads of bits of carbon from the canister came out ,been fine ever since☺
#4
Posted 15 September 2016 - 07:39 AM
Nothing to worry about just a bit annoying 😠 mine was noisy after s/c conversion - removed cleaned through with brake cleaner aerosol ( put temporary 12v to open valve first ) and loads of bits of carbon from the canister came out ,been fine ever since☺
Is it easy to get to and remove?
#5
Posted 15 September 2016 - 08:05 AM
Should be able to get at it through drivers side wheel arch. Hoses are held on with a couple of clips you will need to pry or cut off.Is it easy to get to and remove?Nothing to worry about just a bit annoying 😠 mine was noisy after s/c conversion - removed cleaned through with brake cleaner aerosol ( put temporary 12v to open valve first ) and loads of bits of carbon from the canister came out ,been fine ever since☺
#6
Posted 15 September 2016 - 03:52 PM
#7
Posted 15 September 2016 - 05:18 PM
#8
Posted 15 September 2016 - 11:43 PM
Cheers haggi, at that price I think I'll just replace it.Mine did it also so bought a new valve and the problem has gone https://www.ebay.co....tm/221350399247
#9
Posted 16 September 2016 - 08:27 AM
#10
Posted 16 September 2016 - 01:14 PM
Just picked up a genuine GM one on ebay. £17.50
#11
Posted 16 September 2016 - 02:00 PM
#12
Posted 18 September 2016 - 09:37 PM
#13
Posted 18 September 2016 - 10:00 PM
That is loud, sounds like a bloody woodpecker in there. Strange that it seems to have done it after the sc conversion for a few people. More vacuum created or something I suppose. Will change mine over once it arrives.Mine did this after the SC was fitted to, wouldn't call it feint in my case though! Replaced the Evap valve with one from eBay and all fine since. Through the wheel arch as others have said, I couldn't get the original clamps off so cut the hoses and used jubilee clips. Here's what mine sounded like before: https://youtu.be/XXsKAL5_f1s
#14
Posted 19 September 2016 - 10:25 PM
#15
Posted 08 December 2018 - 09:03 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users