now available HEL performance dry break coupling for brake lines
cost £79 each coupling
this can be added to existing brake lines if sent in to have fitting added
any questions then please message me available for cars and bikes.
For use with all hydraulic fluids including brake fluid, this couplings prevents the need to purge/re-bleed the system and is used throughout the automotive and motorcycling racing industry for this reason.
This quick release dry break coupling has male -3 AN JIC threads.
Push and twist the reliable bayonet locking system to make quick and easy connections of brake and clutch lines with no spills or ingress of air.
Ideal for changing the master cylinder, brake calipers or pads without the need to re-bleed or clamp any lines.
Flow Diameter
3.2mm (1/8")
Maximum Operating Pressure
5100 PSI
Applications
Brake, Clutch
[color=rgb(238,238,238);font-family:'Helvetica Neue', Helvetica, Roboto, Arial, sans-serif;]Manufactured from very lightweight 6AL4V titanium and available in a hard-wearing anodised black and silver finish.[/color][color=rgb(238,238,238);font-family:'Helvetica Neue', Helvetica, Roboto, Arial, sans-serif;] quick release dry break coupling has male -3 AN JIC threads.[/color]
Push and twist the reliable bayonet locking system to make quick and easy connections of brake and clutch lines with no spills or ingress of air.
Ideal for changing the master cylinder, brake calipers or pads without the need to re-bleed or clamp any lines.
Flow Diameter
3.2mm (1/8")
Maximum Operating Pressure
5100 PSI
Applications
Brake, Clutch
Manufactured from very lightweight 6AL4V titanium and available in a hard-wearing anodised black and silver finish.