9 replies to this topic

[Danger Mouse]

Hello.  

Can someone please help. I'm suffering from Man-Flu and a few days ago i repined the throttle body plug.  Now after looking at my notes for the build, I've two diagrams that conflict each other as to correct position of wires.  

 

With a fuzzy head ive been out and checked an have the following;

 

Looking at the rear of the plug (where wires go in) its labelled A on top left. My wire colours are top row from left to right:

Blue,Black/Red,Brown,Blue

Bottom row from left to right:

Brown/Red,Brown/White,Black/Red,Brown.

 

Have i done this correctly?  Im hoping so as i think i used the diagram from 2-Day Build instructions.

 

Please help if you can.

 

Many thanks.

[CHILL Gone DUTCH]

[CHILL Gone DUTCH]

Does this help

[Danger Mouse]

I think so, thanks. Looks like I've bottom row back to front. I was stressing that I could have mixed up colours but I think it will be simply swap bottom row order. Thanks.

[Danger Mouse]

That's what I've currently got....

[Danger Mouse]

Sorry but brain not functioning. The way mine is laid out is correct, isn't it? Let this be a lesson. Don't work on car when dosed up to the eyeballs on Lemsip(other cold remedies are avalible)!!

Edited by Danger Mouse, 17 January 2017 - 07:12 PM.

[CHILL Gone DUTCH]

Looks good to me

[Danger Mouse]

Nice one, cheers. Any day now for firing her up.

[CHILL Gone DUTCH]

As long as you haven't got the car cables which are the same colour mixed up You should be fine

[vocky]

As you spend a few minutes swapping the wires around to make your 68mm TB work, just remember it was me who spent weeks of my time to figure it out - way back in 2006.

 

I never realised it would spread around the world and is now accepted as the 'norm' thing to do when fitting a SC to a z22se / L61 instead of buying a 68mm/58mm adapter plate

Edited by vocky, 18 January 2017 - 08:12 AM.