12 replies to this topic

[FLD]

sh*t box broke down on me with a P1514. Anyone got these usual culprits? Thanks.

[CHILL Gone DUTCH]

Could be a throttle pedal to grittier body issue I have a TB you can borrow and try

[CHILL Gone DUTCH]

Could also be a ecu pin

[CHILL Gone DUTCH]

Can you not just reset it with scanguage

[CHILL Gone DUTCH]

Are you losing the throttle pedal/body

[FLD]

Got no pedal with it either. If I reset it I get a second of normal running before it turns bad again.

[CHILL Gone DUTCH]

Possible wiring also At work tonight but I'm of for 4 after that if that helps

[CHILL Gone DUTCH]

It might be worth keeping resetting it a few times If you haven't started for a while As the ecu might be trying to back corrections

[CHILL Gone DUTCH]

If it's missing check the coil pack and coil pack springs

[smiley]

1514 have been reported as:

 

- scangauge set to showing more then 3 values - faulty injector - faulty map sensor - Leak in inlet manifold

 

[vocky]

I would try a new MAP sensor first, make sure it's a genuine part

[The Batman]

The princess has one on the way

[FLD]

Thanks guys!