Before Xmas I bought a tume of Argon gas and prepaired to start up my never used 10 year old TIG welder.
I have practised but my skills is not improving fast enought and the spring is comming closer and closer everyday.
And my Aluminium sheets I bought many years ago will soon be wasted if my skills is not improving rapidly.
I have some more ideas to be tested but if it´s not working I will refuse to give up my plans for a diffuser.
So I began to think about using Wood, plywood. I thought about using 4mm plywood
this would actually be lighter then my 1.5mm alumium sheet.
I see 2 downsides using plywood
1 is risk of fire down in the rear end of my car.
And if accident then it might crack and not easy to bend back.
Else it´s easy to work with easy to shape and plan to glue and screw together the panels.
I also belive the fiberglass Products and polyester will work fine together with the plywood.
And what is the best way to protect the Wood from my exhaust manifold? Get some gold foil or some Nimbus protection?
What do you think about using plywood?
Or does someone else have any other idea of material that is good to work with or Construction/design ideas?
, Per