2 replies to this topic

[Mike Hill]

Have read most of the discussions  on this.

I have 12v going to the rear nearside speed sensor and also readings when the wheel is spun that varies with speed. So I assume the sensor is working.

I have no abs light on but the speedo still doesn't work.

I have checked and cleaned all the fuses.

Any other ideas

[aquilaproejct]

To confirm hub and wiring is working create a patch harness to use the Lhs rear as the speed signal. If that doesn't work then it's probably the abs ecu

[Johnboyhgt]

Look for corroded wiring, strip the wires from the conduit and examine the length for green corrosion.

Also check for green corrosion on the multiplug.

Sent from my SM-G903F using Tapatalk