10 replies to this topic

[siztenboots]

These are EBC discs , there are marking on the outer edge stating minimum thickness 24.0mm

 

On mine the front left rotor had worn through the grooves on the inner face and partially the outer face , measured min thickness 24.6mm / 24.445mm using micrometer and digital calipers.

 

New rotors 26.0mm

 

New fixings , torque to 12Nm

 

I will get some photo's up later and weights

 

Ally bell 477g

Rotor new 5.5Kg / worn 5.2Kg

[siztenboots]

[Tony H]

When you say EBC discs, do you mean you bought them somewhere other than eliseparts?

[siztenboots]

EBC is where EP source them from and machine them, I ordered mine from BoT and they came from EP

 

Fitted, all new lock wire

[hairy]

How many miles / track days?

[Dave E]

Are they cheaper than getting them direct from EP then?

[siztenboots]

Ask Jez, they get a bigger EP discount than I can do even with group buy. Last service I did not even check the bill they were on, but know Jez will look after me.

[chris_uk]

Are they sided?

[rueda]

12Nm or 10Nm of torque ?

I need to do the same (new bell with different offset), and I've seen 10Nm on the sheet given with the discs.

[Dave E]

Are they sided?

If they are the same my 3 year old EP lightweight bells and Rotas, they’re not.

[chris_uk]

Then they need throwing in the bin.