There is a 30 day free return i offer to everyone - if you are unhappy within 30 days you can send it back and i return the money. Of course you lose the shipping both ways and in case we do an install, i won't be able to return install fee.
Because of how long it takes to install, i think 4 cars a day , maybe 5 a day is maximum i can do (10-12 hrs of work). I think we can agree on how we do the install with Jon via email.
Also you will have to buy all required wiring :
* for injectors i use 8 wire harness used for trailers 8 * 0.75mm
* for and for ABS sensors STP cat 5e cable (stranded, as solid easily brakes when bent),
* for clutch , led and pot standard 2 wire harness 2 * 0.5mm , but in case pot and led is mounted close to each other, then 4 * 0.5mm harness is better.
* a lot of solder and solder paste , thermoshields and tapes i can bring with me, as it does not weight that much.
As for shipping and paying details i think we will work that out via email with Jon.
One fitting location would be somewhere close to London - ideally someones workshop or some remote place where 5 cars won't be a problem for the neighbours and for sure it has to be some weekend with an optional friday or monday , so there is 1 day of slack.
Btw - i am not sure about clutch signal - can you provide proven VX220 schematics where we can trace the clutch signal to ECU ?
Edited by RaceTCS, 18 August 2018 - 04:04 PM.