3 replies to this topic

[ukcat]

Hi All - Wanting to get to the rear hub nuts with a socket - Obviously they are blocked by the cv joint - Is it possible to pull the hub and upright off the drive shaft but leaving the bottom ballj joint in place i.e just removing the top bolts which attach the upright to the ball joint plinth 

Cheers 

Tony

[Johnboyhgt]

Undo the driveshaft nut and push that all the way towards the gearbox. Should be able to get a 3/8th socket and ratchet in then.

Sent from my SM-G903F using Tapatalk

[Johnboyhgt]

Push driveshaft that should read.

Sent from my SM-G903F using Tapatalk

[ukcat]

Undo the driveshaft nut and push that all the way towards the gearbox. Should be able to get a 3/8th socket and ratchet in then.

Sent from my SM-G903F using Tapatalk

Fantastic - Thanks