3 replies to this topic

[james4563]

DOes anyone know what size they are?

 

Are the 0280 150/155/160  all the same, I found a kit that seems to suggest they are the same seals?

 

https://www.amazon.c...6/dp/B00ATHI2EU

 

Out of stock, but it seems to suggest that they are the same seal across all those part numbers, can anyone confirm?

 

If so I guess something like this would be suitable? http://www.turbonoz....NTIRKB0072.html

 

 

 

 

 

[siztenboots]

do you think the manifold injector port is oval or the seal not sitting tight? I always use plenty of LM grease on mine.

 

probably have some old LET injectors with seals 

[james4563]

Well I've actually been having a strange positive LTFT of about 4-7% which I though might have been down to a intake leak somewhere.

 

However this morning I changed my airbox back to standard ( had a cone filter fitted ) and now the LTFT has actually gone to ~-2%, so it's gone from being lean, to a little rich simply by fitting the stock airbox back on. I had tested it for over a week looking for leaks and the LTFT would always go positive after reset, I guess it must be related to MAF readings being off with the cone.

 

It actually read more g/s with the standard airbox too. Peaking at 205 g/s with the airbox. Never saw it that high with the cone on.

 

 

[siztenboots]

205 g/s is spot on , there must have been quite a pressure drop across the cone filter