Loose Wire
#1
Posted 28 December 2018 - 05:35 PM
Verstuurd vanaf mijn ONEPLUS A6003 met Tapatalk
#2
Posted 28 December 2018 - 05:39 PM
Brown relay K18 - pin 87, the bottom centre slot in the top or bottom picture
https://www.speedste...e Z22SE - 1.pdf
ps: push the middle pin back in too
#3
Posted 28 December 2018 - 06:39 PM
Verstuurd vanaf mijn ONEPLUS A6003 met Tapatalk
#4
Posted 29 December 2018 - 02:19 PM
Funny to see this post, yesterday my car randomly wouldn't start. Button seemed to do nothing at all.
Turned out one of the pins on the yellow relay which is for the starter system had fallen out of the black connector. When I looked at it they are all pretty lose and seem to fall out with minimal force, is there a easy way to secure the cables better within the black connectors? I had trouble with mine where I'd push the relay in and it would push the pin out from the connector.
Edited by james4563, 29 December 2018 - 02:21 PM.
#5
Posted 30 December 2018 - 06:57 AM
Same happened to me a few years back...Funny to see this post, yesterday my car randomly wouldn't start. Button seemed to do nothing at all.
Turned out one of the pins on the yellow relay which is for the starter system had fallen out of the black connector. When I looked at it they are all pretty lose and seem to fall out with minimal force, is there a easy way to secure the cables better within the black connectors? I had trouble with mine where I'd push the relay in and it would push the pin out from the connector.
#6
Posted 30 December 2018 - 07:05 AM
Funny to see this post, yesterday my car randomly wouldn't start. Button seemed to do nothing at all.
Turned out one of the pins on the yellow relay which is for the starter system had fallen out of the black connector. When I looked at it they are all pretty lose and seem to fall out with minimal force, is there a easy way to secure the cables better within the black connectors? I had trouble with mine where I'd push the relay in and it would push the pin out from the connector.
Solder!
#7
Posted 30 December 2018 - 08:10 AM
Verstuurd vanaf mijn ONEPLUS A6003 met Tapatalk
#8
Posted 30 December 2018 - 09:04 AM
you also need to bend the locating pin outwards a small amount
like these in the photo https://www.12voltpl...ocking-tab.html
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users