Im looking at a vx, owner says it's stage four + with dyno printout, it has a milltek exhaust. I thought the miltek was only 2.5 inch, and a 3inch was needed for anything above stage four and above.
Owner is claiming 320bhp with dyno printout
Milltek Exhaust On Stage Four Is It Possible
Started by
vxtnewbie1
, Jan 17 2019 09:33 PM
5 replies to this topic
#2
WrightStuff
-
-
- 2,238 posts
i am sheldon cooper
- Gender:Male
- Location:Derby
Posted 17 January 2019 - 09:38 PM
#3
iram
-
-
- 246 posts
Member
- Gender:Male
- Location:cambridgeshire
Posted 17 January 2019 - 10:51 PM
i ran 428hp on a miltek 2.5" so never quite got the "you need a 3 inch for 300hp" statement! id be more interested in your case what turbo and other mods it has to get to 320hp to gain your answer! regards iram
#4
VX DAVE
-
-
- 139 posts
Member
- Gender:Male
- Location:North West
Posted 18 January 2019 - 12:46 AM
I used to have a mk4 astra
z20 LET but with a z20 LEH turbo, VXR injectors (blue) EDS cams, EDS 3.5 software, Milltek 2.5 turbo back exhaust system, RR'd at MPG Cheshire, 324 bhp
#5
mbes2
-
-
- 8,507 posts
Someone say Plasti Dip?
- Gender:Male
- Location:Feering, Essex
-
Interests:"Keep it standard"
"Yes, I built it"
Posted 18 January 2019 - 11:20 PM
I used to have a mk4 astra
z20 LET but with a z20 LEH turbo, VXR injectors (blue) EDS cams, EDS 3.5 software, Milltek 2.5 turbo back exhaust system, RR'd at MPG Cheshire, 324 bhp
It's the vx tubby intake temps it can't handle compared to a front rad intercooler system.
#6
oblomov
-
-
- 3,758 posts
Scary Internerd
- Gender:Male
- Location:Sitting in front of my computer
- Interests:None
Posted 19 January 2019 - 11:45 AM
I run 300bhp on a 2.5 Miltek without problems. Your 3" idea is incorrect.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
