16 replies to this topic

[Spandex]

Seems mine have had it  What have you got ? Modest amount of cash waiting..

[Foxy_Jr]

Assume you mean U-bend to the back box? Or hangers?

[Spandex]

If I'm honest I've not idea - it rattles at low rpm (idle) and then vibrates at any speed especially when cornering hard left. Garage mentioned "bracket", "clamp" and "mount" virtually all in the same sentence. it "won't tighten anymore though cos it's rusty"..

 

Does that help ?

[Foxy_Jr]

If I'm honest I've not idea - it rattles at low rpm (idle) and then vibrates at any speed especially when cornering hard left. Garage mentioned "bracket", "clamp" and "mount" virtually all in the same sentence. it "won't tighten anymore though cos it's rusty"..

Does that help ?

Not really!


Sent from my iPhone using Tapatalk

[Spandex]

 

If I'm honest I've not idea - it rattles at low rpm (idle) and then vibrates at any speed especially when cornering hard left. Garage mentioned "bracket", "clamp" and "mount" virtually all in the same sentence. it "won't tighten anymore though cos it's rusty"..

Does that help ?

Not really!


Sent from my iPhone using Tapatalk

 

 

Yeah, figured as much..I'm told by a man in a cape that it'll be the clamp that I need. Anyone got one or a couple ?

[The Batman]

they are like a couple quid of ebay lol

 

if the backbox is moving then it is more than likely the U bend clamp

[Foxy_Jr]

Have a look here 

[smiley]

Remove the diffuser and the rear left wheel and takes some pictures of your system.

 

[Spandex]

Have a look here 

 

So I need number 20 apparently..

[smiley]

Nr 20 is a common 2" exhaust clamp you should be able to pick up at any car parts store.

If not, http://cgi.ebay.co.u...em=260876613122

 

Edited by smiley, 06 September 2019 - 07:35 PM.

[Spandex]

Nr 20 is a common 2" exhaust clamp you should be able to pick up at any car parts store.

If not, http://cgi.ebay.co.u...em=260876613122

 

Thanks - for Miltek so do I need 2.5" ?? Lot's of choice of sizes on that link and all in mm.. 

[vocky]

63mm - 68mm is probably the size you will need for a 2.5" exhaust connection

[The Batman]

Na miltek is 2”
Turbo miltek is 2.5”

[vocky]

51mm-55mm should be the one you need for your 2" milltek

[Spandex]

Thanks Chaps - I've gone mad and ordered one of each size - up to 51 and 51+

[smiley]

I am slighly surprised your garage made you search for it, where they could source the right part much easier and mount it for you as it is as generic as can be.

[Spandex]

I am slighly surprised your garage made you search for it, where they could source the right part much easier and mount it for you as it is as generic as can be.

 

That's a fair point ! However, I get 'mates rates' on the basis that they provide the ramps and turn the spanners if I supply the bits and do the admin. It kinda works..mostly.