Evening all. My wiper motor has swept it's last sweep. It pops the fuse after half a sweep, which I have been led to believe is an issue with an internal earth.
I intend to remove and replace it, and it seems I have two options:
1. Remove the motor from the linkage, repair or replace.
2. Remove the whole bit, including linkage, repair or replace.
There has been some good gen on here on how to remove but the pics have all died. Does anyone have a detailed how to with pictures, because I can't see where the Allen bolts are on the linkage and I sure as hell can't get on the 10mm nuts to remove the motor unit!
Thanks everyone
Myles
Wiper Motor Replacement
Started by
myles
, Dec 01 2019 10:23 PM
2 replies to this topic
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users