Hi Chris.. Would you have anymore of these by chance?
Getting Desperate, Need A Bush For The F23 Selector Arm
Started by
paul_mck
, Oct 30 2020 03:36 PM
24 replies to this topic
#22
chris_uk
-
-
- 10,060 posts
I Fancy Joe
- Gender:Male
- Location:Leeds UK
Posted 11 May 2021 - 09:32 PM
Hi Chris.. Would you have anymore of these by chance?
i have 1 left which was my tester one, it will work perfectly well if you want it.
#23
2-20
-
-
- 1,314 posts
Billy No Mates
- Location:France
Posted 12 May 2021 - 12:35 PM
Hello Chris,
By chance, do you have the dimensions of these bushes ?
I have a lot of play and need to change it...
I d like to see if i can have some made...
By the way, is there one or two bushes ... the parts catalog shows 2 of them.
Thanks
By chance, do you have the dimensions of these bushes ?
I have a lot of play and need to change it...
I d like to see if i can have some made...
By the way, is there one or two bushes ... the parts catalog shows 2 of them.
Thanks
#24
Steve Heley
-
- 3 posts
Newbie
- Location:Leeds
Posted 13 May 2021 - 08:09 AM
Hi Chris... Thanks for the reply, I've gone with an 'Oilite Bronze Bush Bearing 15mm bore x 22mm OD x 30mm long' cut to length and the pin hole drilled. It's a good fit so we'll see.. However I've now the problem of getting the gear selector back on, lol.
Ebay number: 123164052996
#25
2-20
-
-
- 1,314 posts
Billy No Mates
- Location:France
Posted 14 May 2021 - 10:54 PM
Thank you for the dimensions...
I will have a look at the Ebay bush
I will have a look at the Ebay bush
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
