6 replies to this topic

[EnnZett]

I know that a lot of you have done it already, but for some of you it will be a future task!

 

This is the easiest way to remove the precat in less than 3 (in words three) minutes without bloody fingers and red-hot drills.

 

 

Pic 1. Drill an 8mm hole in the middle of the catalytic converter

 

[attachment=28113:IMG_1.jpg]

 

 

Pic 2. Screw in a 10mm wood screw with the cordless screwdriver

 

[attachment=28114:IMG_2.jpg]

 

 

Pic 3. Clamp the screw in the vice

 

[attachment=28115:IMG_3.jpg]

 

 

Pic 4. A few blows with the hammer on the flange and the cat comes out of the pipe in one piece

 

[attachment=28116:IMG_4.jpg]

 

Finished …......... and

 

Pic 5. Gratification

 

[attachment=28117:IMG_5.jpg]

 

PROST

 

[EnnZett]

Sorry, but I cannot add the wanted pics. Maybe any help???

[hairy]

Well done

[martinf]

Bolted horse springs to mind.

Sent from my LG-H990 using Tapatalk

[EnnZett]

The pictures you will see under

 

part 1.  https://www.speedste....php?f=9&t=8019

 

part 2.  https://www.speedste....php?f=9&t=8020

 

in the NL-Speedsterforum.

 

[blackoctagon]

I use ImageBam for my photos. They always work on here.
http://www.imagebam.com/

[EnnZett]

I use ImageBam for my photos. They always work on here.
http://www.imagebam.com/

Thanks for this information, I will check and try next time.