5 replies to this topic

[clipping_point]

Now, those fekkers should have included it in the delivery, but they didn´t. So, wot size should be used for the adjustment?

Edited by clipping_point, 27 April 2005 - 07:32 AM.

[clipping_point]

Got this from Nitron "The spring platforms have a 6mm hole, so a 6mm pin spanner should work."

[geofflowe]

I agree they should have included something considering the money they cost. Merlin Motorsport at Castle Combe do one but not sure if it will fit (tell you after the 10th may)

[skogshuggarn]

Jag har två Biltema haknycklar när jag justerar Öhlinarna

[Arno]

Don't bother with a C-spanner. C-spanners usually pretty useless on the Elise/Speedster/VX when dampers are fitted as you can hardly get the spanner in and still some room to turn the ring. A 6mm rod (eg. back of drill bit) works much better.. Bye, Arno.

[clipping_point]

OK, funny, that exacly what i used this afternoon! Could not really see how to use the C-spanner..