PDV are advertising back boxs, Sorry for placing the same question again but as yet had no replies. Does the milltec back box on it own inrease bhp / torque ( each car is different), is the sound any better than standard, how long a job is it for an a guy to fit it?
Milltec Back Box
Started by
johnvx220
, Feb 22 2004 01:41 PM
2 replies to this topic
#1
johnvx220
-
-
- 867 posts
Need to get Out More
- Location:Plymouth, South Devon
- Interests:Getting the top off, wife does know yet, other car club.
Posted 22 February 2004 - 01:41 PM
#2
Thorney
-
-
- 11,404 posts
Whipping Boy
- Gender:Male
- Location:Bucks, UK
-
Interests:Global domination.
Fluffy bunny rabbits.
Posted 22 February 2004 - 02:37 PM
Some gains but quite limited just for backbox on it's own.
Not too bad a job to do yourself but is not as straight forward as chucking an exhaust on a normal car due to undertray etc.
#3
Timbo
-
-
- 2,539 posts
Scary Internerd
- Location:near heathrow
Posted 24 February 2004 - 07:10 PM
Had to go to Amd today to get my car RR tested after all the hassle vauxhall caused (are causing) me because i was concerned they had flashed the ecu back to standard.
Anyway the car was putting out 247bhp previous its now putting out 251bhp 
thats with a miltek back box as the only difference so the moral to the story is vauxhall didnt flash my ecu (there still crap though) and a back box only makes about an extra 4bhp.
Hope this helps.
Tim
thats with a miltek back box as the only difference so the moral to the story is vauxhall didnt flash my ecu (there still crap though) and a back box only makes about an extra 4bhp.
Hope this helps.
Tim
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
