hope it's useful to someone else
mart
Front Clam Removal Guide Pdf
Started by
mart356
, Mar 03 2004 12:36 PM
8 replies to this topic
#1
mart356
-
-
- 1,552 posts
Billy No Mates
- Gender:Male
- Location:central england, mid atlantic, usa and wales
- Interests:Playing Music, listening to music, clubbing, going to gigs, cars, design, history, computers, restaurants, Phoenix Nights, travel, canoe/ kyak/ sailing, war, filums, sleeping, working out why girls dont tend to have hobbies.
Posted 03 March 2004 - 12:36 PM
Been working on this thing on and off. As I have to take the clam off this weekend....
Took Steve's excellent guide as posted on the site a while back and laid it out in Quark, then PDFd it. Just managed to shrink it down so I could load it up.
If anyone else is doing some work on their car and fancies doing a 'How to', just sendme pixs and words, will be happy to do the same for other common VX tasks.
looking forward to putting together the 'How to shag in the VX'
hope it's useful to someone else
mart
hope it's useful to someone else
mart
#2
mart356
-
-
- 1,552 posts
Billy No Mates
- Gender:Male
- Location:central england, mid atlantic, usa and wales
- Interests:Playing Music, listening to music, clubbing, going to gigs, cars, design, history, computers, restaurants, Phoenix Nights, travel, canoe/ kyak/ sailing, war, filums, sleeping, working out why girls dont tend to have hobbies.
Posted 03 March 2004 - 12:38 PM
forgot the attachment !!! and accidentally started a new thread.
sorry
Attached Files
-
vx220_front_clam_small.pdf 0bytes
74 downloads
#3
ddpunter
-
-
- 383 posts
Super Member
Posted 03 March 2004 - 03:25 PM
just took mine off-only took an hour, bloody amazed
imho its an easy job for anyone thinking about it
cheers
d
#4
PJG
-
-
- 1,007 posts
Need to get Out More
- Location:Northants / Kent
Posted 03 March 2004 - 03:33 PM
I think a "How to remove pre-cat" would be good...
I have seen a few on here, but something a bit more picture orientated would be good.
#5
Steve Crisp
-
-
- 1,810 posts
Billy No Mates
- Location:Little Ann, Andover, Hants, UK
- Interests:VX220's...
Posted 03 March 2004 - 03:52 PM
Well done Mart,
I'm glad these "how to's" won't be lost.
Ricky and I also did a "How to change the brake pads". Ricky did the front and I did the rear. Can these be PDF'd as well?
Regards,
Steve
#6
mart356
-
-
- 1,552 posts
Billy No Mates
- Gender:Male
- Location:central england, mid atlantic, usa and wales
- Interests:Playing Music, listening to music, clubbing, going to gigs, cars, design, history, computers, restaurants, Phoenix Nights, travel, canoe/ kyak/ sailing, war, filums, sleeping, working out why girls dont tend to have hobbies.
Posted 03 March 2004 - 04:02 PM
Ta steve, it's your knowledge, so thank you!
yes, it's important that we have these 'how toos' as there's no Haines and with all these new owners all we ever seem to do is refer them to search the forum, which i find hit and miss - and these requests happen a lot.
Find me the links for the post and send it to me - I'll do a Front and back brake one.
mart
#7
Steve Crisp
-
-
- 1,810 posts
Billy No Mates
- Location:Little Ann, Andover, Hants, UK
- Interests:VX220's...
Posted 03 March 2004 - 10:16 PM
#8
Steve Crisp
-
-
- 1,810 posts
Billy No Mates
- Location:Little Ann, Andover, Hants, UK
- Interests:VX220's...
Posted 03 March 2004 - 10:17 PM
#9
mart356
-
-
- 1,552 posts
Billy No Mates
- Gender:Male
- Location:central england, mid atlantic, usa and wales
- Interests:Playing Music, listening to music, clubbing, going to gigs, cars, design, history, computers, restaurants, Phoenix Nights, travel, canoe/ kyak/ sailing, war, filums, sleeping, working out why girls dont tend to have hobbies.
Posted 05 March 2004 - 09:56 AM
cheers, will take a look over the weekend and see what I can put togther.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
