Hey guys,
Anyone know why my garw would be doing this?
https://s.amsu.ng/MPkDrVGS63AN
/Vincent
Garw Screen Incorrect Values
Started by
VincentL
, Apr 16 2018 05:58 AM
11 replies to this topic
#2
vocky
-
-
- 11,969 posts
Moderator
- Gender:Male
- Location:Earth
Posted 16 April 2018 - 06:44 AM
thats in programming mode, push the joystick about and you can exit it
#3
Mattyboi
-
-
- 482 posts
Super Member
- Gender:Male
- Location:Hinckley
Posted 16 April 2018 - 07:19 AM
As Vocky said, thats the set up screen. If you exit to the main screen it should all read correctly.
#4
VincentL
-
-
- 131 posts
Member
- Location:Sweden
Posted 16 April 2018 - 08:15 AM
Unfortunately, the same values in the setup screen shows on the live screen (the fuel % seems to be way off on the phone app) and water temp, boost and so on seem to not work as well.
#5
VincentL
-
-
- 131 posts
Member
- Location:Sweden
Posted 16 April 2018 - 11:51 AM
See oil temp, pressure and fuel is at -63...
https://cloud.larsso...gtwDWGZ6Rt7ZoJN
Water temp is at 93 (set to C) but the engine had not been running in 3 months so i highly doubt the accuracy
#6
Mattyboi
-
-
- 482 posts
Super Member
- Gender:Male
- Location:Hinckley
Posted 17 April 2018 - 07:01 AM
I'm away from my car at the moment but I can take a look on Sunday at what mine is set at.
The oil temp and pressure wont work, you'll need additional sensors for that. My water temp reads high sometimes until I turn the engine on when it then reads correctly, it only does this before the first start up. My fuel percent is accurate.
#7
VincentL
-
-
- 131 posts
Member
- Location:Sweden
Posted 17 April 2018 - 11:04 AM
I'm running with a ODB2 reader right now because i just installed a chargecooler so i'm unsure if my attempts at removing bubbles from the cooling system have been successful. Good to know about the oil temp/pressure but i guess fuel% and water temp would still be good to have.
By they way, anyone got a link to sensors that i could install to get the oil temp/pressure as well as anything else that might be interesting?
Is the intake temperature the air before or after the turbo?
Edited by VincentL, 17 April 2018 - 11:04 AM.
#9
VincentL
-
-
- 131 posts
Member
- Location:Sweden
Posted 17 April 2018 - 06:28 PM
Read about 20 pages and saw some tips
1. Upgrade the dash (unfortunately there is no update for the ic8)
2. Select an exige map and save, then select vx map and save. This didn't resolve my fuel%/water temp issues unfortunately
#10
VincentL
-
-
- 131 posts
Member
- Location:Sweden
Posted 20 April 2018 - 11:47 PM
So it's been a week since I mailed garw, no response. Anyone else have similar issues? Could it be DoA?
#11
VincentL
-
-
- 131 posts
Member
- Location:Sweden
Posted 29 April 2018 - 05:42 PM
So just a quick update. Garw has responded to my mail and is going to update the firmware. (hopefully before the track day next Saturday)
#12
Mattyboi
-
-
- 482 posts
Super Member
- Gender:Male
- Location:Hinckley
Posted 30 April 2018 - 07:22 AM
Thats good news! Hope it comes in time for you!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
