4.17 Gearbox Wanted
#1
Posted 03 January 2019 - 04:32 PM
#2
Posted 04 January 2019 - 10:02 AM
Back on the mods then!
#3
Posted 04 January 2019 - 10:12 AM
Not willingly... Took rear subframe off, discovered massive crack in gearbox / bell housing casing...
If I'm getting a replacement, might as well try and 'upgrade'..
#4
Posted 04 January 2019 - 06:10 PM
Between the 2 sump 19mm bolts ?
Sent from my SM-G903F using Tapatalk
#5
Posted 04 January 2019 - 06:51 PM
Is it at the bottom ?
Between the 2 sump 19mm bolts ?
Sent from my SM-G903F using Tapatalk
Nope, just next to the 19 and 17mm bolts for the rear engine/gearbox mount..
#6
Posted 11 January 2019 - 09:27 AM
Alternatively, if someone had a scrap / dead F23 bell housing that they were not using that would also suffice...
#7
Posted 12 January 2019 - 07:38 AM
I you help me take my F23 out of my VXT you can have it for free. The housing is fine on it.
#8
Posted 12 January 2019 - 08:29 AM
z22se bellhousing is different to the vxT
#9
Posted 12 January 2019 - 08:39 AM
z22se bellhousing is different to the vxT
Ah, he's NA then I take it. Poop.
Edited by Nev, 12 January 2019 - 08:40 AM.
#10
Posted 12 January 2019 - 09:02 AM
#11
Posted 12 January 2019 - 09:59 AM
the vx220 uses the astra G z22se gearbox, not sure why they gave it a seperate code - TN
Astra is the SF or AH, both being the 3.95 FD
The zafira A z22se used the SG 4.17 FD gearbox (the AQ is also a 4.17 zafira box)
You could buy a 4.17 FD gearbox from the Signum z22yh = XY, but then you would have to swap the bellhousing with a z22se item due to the deeper position of the slave cylinder on the z22yh - for the dual mass flywheel.
#12
Posted 12 January 2019 - 10:15 AM
there is one zafira z22se F23 4.17 on ebay, the later spec AQ, but it's way overpriced at £400
https://www.ebay.co....mCondition=3000
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users