Working through fitting the new SCS ecu, and will be fitting a 32 tooth trigger wheel to. Is there a standard position for the missing tooth to be at TDC, or will it very ecu to ecu...
Sent from my iPhone using Tapatalk
36 Tooth Trigger Wheel Position And Delta Ecu
Started by
Mat Jackson
, Mar 31 2019 07:10 PM
3 replies to this topic
#1
Posted 31 March 2019 - 07:10 PM
#2
Posted 01 April 2019 - 11:19 AM
you can adjust the offset in the software.
I'd just ask SCS to check the wheel matches one in the software.... They gave me the settings then Vocky installed.
I'm using the internal 60-2 90degress btdc
I guess for the external one you can set the sensor at an angle of your choosing?
Sent from my Mi A2 Lite using Tapatalk
I'd just ask SCS to check the wheel matches one in the software.... They gave me the settings then Vocky installed.
I'm using the internal 60-2 90degress btdc
I guess for the external one you can set the sensor at an angle of your choosing?
Sent from my Mi A2 Lite using Tapatalk
#3
Posted 01 April 2019 - 06:35 PM
Just spoke to Simon and it’s also 90 deg btdc too...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
#4
Posted 02 April 2019 - 08:05 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users