T7 Heater Or Fezza Electrics Module Wanted
#1
Posted 16 February 2021 - 07:26 PM
#2
Posted 16 February 2021 - 10:00 PM
Can’t remember which one it is though, I’m sure Fez will be along to enlighten shortly! 😂🤦ðŸ»â€â™‚ï¸
#3
Posted 17 February 2021 - 06:24 PM
Might have the box somewhere if you want it.
will look tomorrow
#4
Posted 17 February 2021 - 09:04 PM
Might have the box somewhere if you want it.
will look tomorrow
Thanks mate, appreciate it. It sounds like its the electric on/off signal being loose somewhere. It runs sometimes fine, suggesting the motor is ok, and its already running the manual valve version...
#5
Posted 18 February 2021 - 08:56 AM
If you are running the manual valve version it has to be a wiring issue, either the fan switch in the cabin or the feed to the motor that connector between the fan and the feed is the most likely culprit. Run the fan with the hood up and move the wires around near the connector and on the fan itself. Worth a try, also electrical contact cleaner on plugs. If you still have a radio remove it to get to the back of the fan speed control.
I will look today for my spares pack.
#6
Posted 19 February 2021 - 10:32 PM
If you are running the manual valve version it has to be a wiring issue, either the fan switch in the cabin or the feed to the motor that connector between the fan and the feed is the most likely culprit. Run the fan with the hood up and move the wires around near the connector and on the fan itself. Worth a try, also electrical contact cleaner on plugs. If you still have a radio remove it to get to the back of the fan speed control.
I will look today for my spares pack.
Hi mate, thanks for the info. Its been such a long time since I fitted it, I cant remember how its set up. I'll have a rummage about in the front and under the dash and see what the problem is
#7
Posted 22 February 2021 - 04:38 AM
i have a full fez heater available if thats what youre after
#8
Posted 22 February 2021 - 08:57 PM
i have a full fez heater available if thats what youre after
Thanks Joe, I'll take a look at what the issue is at the weekend and get back to you...
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users