4-point Harnesses
#21
Posted 13 March 2003 - 08:38 PM
#22
Posted 14 March 2003 - 09:10 AM
#23
Posted 14 March 2003 - 09:28 AM
#24
Posted 14 March 2003 - 09:34 AM
#25
Posted 14 March 2003 - 09:49 AM
Edited by Ricky2772, 14 March 2003 - 09:51 AM.
#26
Posted 14 March 2003 - 12:17 PM
Attached Files
#27
Posted 14 March 2003 - 01:21 PM
Sure Paul, stil count me in. Got to let the tax man have his pound of fleshSo far we have myself and garyk220 as definites and Thorney as a possible. Any other interest as we need to get to at least 5.
Just realised that the prices I quoted are +VAT at 17.5%. You still in at that price Gary?
As you said, some minor trimming of the side panel will be inevitable, since it half covers the roll bar at the harness bar mounting point. It should only be an inch or two, and will be hidden behind the seat headrest, so I'm not too worried.
Paul, if you've got 3 definites(including me and you), count me in for sure.
Gary
Edited by garyk220, 14 March 2003 - 01:22 PM.
#28
Posted 14 March 2003 - 01:47 PM
#29
Posted 14 March 2003 - 02:03 PM
#30
Posted 14 March 2003 - 08:42 PM
#31
Posted 14 March 2003 - 09:19 PM
#32
Posted 14 March 2003 - 09:51 PM
#33
Posted 15 March 2003 - 07:54 AM
#34
Posted 15 March 2003 - 08:12 AM
#35
Posted 15 March 2003 - 09:43 AM
well, I guess you guys are damn right.....Also the point you're looking to attach the harness to is too high, 4 points need to be attached within a very specific angle of the shoulder, to high and they can break your collar bone
I'll go for the bar route, a friend of mine installed a Sparco kit on his Elise....
will ask him....
thanks for the advice!
#36
Posted 15 March 2003 - 01:41 PM
http://www.sport190.com/showpic.asp
the bar behind is bolted to the rollbar, where the stock belt is...
the passenger set-up would be plenty good for my needs, road+track use....
#37
Posted 15 March 2003 - 10:05 PM
Edited by Dave T-S, 15 March 2003 - 10:07 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users