62 replies to this topic

[chrisvx220]

George, your responce is apprecieted cheers, I knew you redrilled etc but that is to be expected to some extent as the mounting holes vary slightly between cars, the deburring I wasnt aware of and would have offered replacement had you mentioned this. This is the same issue I encountered on one of the two I mentioned in my post further up of which I saw photos of and replaced as the quality should have been as per the others. Agreed longer will look better with the big wing same plan I have though my wing is ccurrently sat in the spare room which wing supports did you use out of interest?

[vx220bass]

Which length would be closest to the old jimsan diffuser?

[chrisvx220]

the short would be very similar to the Jimsan

[chrisvx220]

UK
1.Chrisvx220 Long
2. Stuwy, Long + Deep
3.
4.
5.

Over Sea's
1. T_L_P, Short
2. Blitz, Short
3.

Just need one more to make the minimum number and we can get these underway, postage to Austria and Belgium looking at around £40.00 so shipping over to Europe isnt too silly for any one that may be put off by this

[ianrm]

What is the closing date for orders ?

[vx220bass]

UK
1.Chrisvx220 Long
2. Stuwy, Long + Deep
3.vx220bass Short
4.
5.

Over Sea's
1. T_L_P, Short
2. Blitz, Short
3.

[chrisvx220]

UK
1.Chrisvx220 Long
2. Stuwy, Long + Deep (Confirmed, awaiting payment)
3.vx220bass Short (Confirmed, awaiting payment)
4.
5.

Over Sea's
1. T_L_P, Short (Awaiting confirmation)
2. Blitz, Short (Confirmed, awaiting payment)
3.

Will start taking payments once all are confirmed 100% happy, just awaiting T_L_P is happy with postage etc hopefully they can ordered by the end of the week and materials ordered

[chrisvx220]

What is the closing date for orders ?

No closing date mate only limiting factor is quantity, can do up to 10 but there after will need to start a new group buy as material will have been ordered etc hoping to have ali for the first 10 ordered by the end of the week if payments etc can be sorted that quick

[chrisvx220]

UK
1.Chrisvx220 Long
2. Stuwy, Long + Deep (Confirmed, awaiting payment)
3.vx220bass Short (Confirmed, awaiting payment)
4.
5.

Over Sea's
1. T_L_P, Short (Confirmed, awaiting Payment)
2. Blitz, Short (Confirmed, awaiting payment)
3.

I will pm everyone details for payment

[chrisvx220]

UK
1.Chrisvx220 Long
2. Stuwy, Long + Deep (Payment Recieved)
3.vx220bass Short (Confirmed, awaiting payment)
4.
5.

Over Sea's
1. T_L_P, Short (Confirmed, awaiting Payment)
2. Blitz, Short (Confirmed, awaiting payment)
3.

[chrisvx220]

UK
1.Chrisvx220 Long
2. Stuwy, Long + Deep (Payment Recieved)
3.vx220bass Short (Payment Recieved)
4.
5.

Over Sea's
1. T_L_P, Short (Confirmed, awaiting Payment)
2. Blitz, Short (Confirmed, awaiting payment)
3.

Edited by chrisvx220, 07 March 2012 - 10:29 PM.

[chrisvx220]

1.Chrisvx220 Long
2. Stuwy, Long + Deep (Payment Recieved)
3.vx220bass Short (Payment Recieved)
4.
5.

Over Sea's
1. T_L_P, Short (Confirmed, awaiting Payment)
2. Blitz, Short (Payment Recieved)
3.

[chrisvx220]

Great news, recieved all payments so far now I will contact the fabricators today and ask him to get them underway.

1.Chrisvx220 Long
2. Stuwy, Long + Deep (Payment Recieved)
3.vx220bass Short (Payment Recieved)
4.
5.

Over Sea's
1. T_L_P, Short (Payment Recieved)
2. Blitz, Short (Payment Recieved)
3.

If anyone else wants one I will be asking him to make 10 so I will have 5 spare, I will ask for two long and three short so let me know quick what you want

[chrisvx220]

Spoke to the fabricators and he has only just recieved the sheet metal from his supplier earlier this week so not a lot of progress yet, he is ademant that they are still good for mid April though and should have quite a few welded up by now as they were on with the welding when I called powder coaters normaly drag their heals a little so I will call him again next week for another update and a little push Ohh also anyone else wanting one I should have 2 long and 3 short going spare

[Andrew aka Stuwy]

[chrisvx220]

Just a little teaser seen as I polished mine the other day this is a long btw

[chrisvx220]

Spoke to the fabricators and they have them all made ready for powder coating they will be dropped off with them on tuesday

[chrisvx220]

Had confirmation that they should be back from the powder coaters today/tommorow the fabricators should be able to get them wrapped, packaged and labled over the weekend so that they can be couriered out next week
For the European ones I will contact the couriers Monday and ask for an eta, I will let you know how quick they can ship them

1.Chrisvx220 Long
2. Stuwy, Long + Deep (Payment Recieved)
3.vx220bass Short (Payment Recieved)
4. Daniel Weald Short (Awaiting Payment)
5.

Over Sea's
1. T_L_P, Short (Payment Recieved)
2. Blitz, Short (Payment Recieved)
3.

This leaves 2 short and 2 long available

[wantsum]

Hi Chris I will take a short in black if youve got one spare can pick up as Im in Barnsley cheers Scott

[chrisvx220]

1.Chrisvx220 Long
2. Stuwy, Long + Deep (Payment Recieved)
3.vx220bass Short (Payment Recieved)
4. Daniel Weald Short (Awaiting Payment)
5. Wantsum Short (Awaiting Payment)
6.

Over Sea's
1. T_L_P, Short (Payment Recieved)
2. Blitz, Short (Payment Recieved)
3.

One short and two long available