Newbie From South Wales
#1
Posted 07 April 2013 - 08:38 PM
I had it from a member on here (Capps) And I'm more than happy with it! Cheers Capps!!
Admittaly it needs some work but a little tlc will go along way!
I am good mates with Fred666 and id like to thank him for joining me today on the journey!
Btw...you may all hate this and think its only asking for trouble, (I respect the car and will spend a long time getting used to it before any hard driving) but....I'm only 20 years old
Any opinions are welcome.
Thanks
#2
Posted 07 April 2013 - 08:40 PM
#3
Posted 07 April 2013 - 08:44 PM
#4
Posted 07 April 2013 - 08:48 PM
#5
Posted 07 April 2013 - 08:57 PM
#6
Posted 07 April 2013 - 09:27 PM
#7
Posted 07 April 2013 - 09:33 PM
#8
Posted 07 April 2013 - 09:42 PM
#9
Posted 07 April 2013 - 09:49 PM
#10
Posted 07 April 2013 - 10:00 PM
#11
Posted 07 April 2013 - 10:10 PM
#12
Posted 07 April 2013 - 10:17 PM
#13
Posted 07 April 2013 - 10:23 PM
#14
Posted 07 April 2013 - 10:38 PM
#15
Posted 08 April 2013 - 05:04 AM
#16
Posted 08 April 2013 - 08:34 AM
#17
Posted 09 April 2013 - 07:24 PM
#18
Posted 09 April 2013 - 07:33 PM
H1hwk- thanks, I'm really hoping to get maximum use out of it this summer. I will be driving like a granny for a while to get used to the non powered steering. Lol need arms like arnie to do full lock!
check your tire pressures, when i picked mine up it only had 12psi in the front and 16 in the rears, stearing was HEAVY.
#19
Posted 09 April 2013 - 07:35 PM
Ordered some drilled and grooved discs yesterday so will hopefully get them fitted this weekend. Is there a 'how to thread' hiding somewhere explaining how to change the discs?
Iv obviously used the search bar but can't find anything. :/
Also my ABS light came on last night! could this be due to the discs or will I need to check the sensor on the rear hub?
Thanks
you can jack the whole of one side up using the central jacking point, its inline with the door/vent area.
there are guides on here, but its not too difficult to do, had mine all off to do the front pistons and seals and paint the caliper.
#20
Posted 09 April 2013 - 07:36 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users