Jump to content


Photo

Mk2 Lambda Cheater Install Guide

trumpet puffin lambda cheater slinderella

  • Please log in to reply
18 replies to this topic

#1 slindborg

slindborg

    The Bishop of Stortford

  • PipPipPipPipPipPipPipPip
  • 22,602 posts
  • Gender:Not Telling
  • Location:.

Posted 30 April 2014 - 08:11 PM

Updated version for MK2 cheaters.   https://drive.google...dit?usp=sharing   It is worth noting that the 25W resistors mounted to the 75mm ali sheet you all have, will still get sodding hot and needs to either be somewhere with a little air flow or mounted to the subframe/heat sheilding etc. I.E. dont mount it on carpet or on plastic :lol:   Also of note, the cable colours for the vehicle loom are on the engine side of the connector and not the sensor connector, so a little bit of matching and away you go :)

#2 slindborg

slindborg

    The Bishop of Stortford

  • PipPipPipPipPipPipPipPip
  • 22,602 posts
  • Gender:Not Telling
  • Location:.

Posted 30 April 2014 - 10:08 PM

Please wait till tomorrow for another update..... It'll be better, I promise :)

#3 Zoobeef

Zoobeef

    Joes bedroom assistant.

  • PipPipPipPipPipPipPip
  • 11,103 posts
  • Gender:Male
  • Location:Retford/Bovington

Posted 02 May 2014 - 10:46 AM

Received mine today cheers! Although you've broken your promise haha.

#4 slindborg

slindborg

    The Bishop of Stortford

  • PipPipPipPipPipPipPipPip
  • 22,602 posts
  • Gender:Not Telling
  • Location:.

Posted 02 May 2014 - 11:12 AM

bugger :lol:

 

its not even the 1st of May somewhere in the world still either

New one will be uploaded V soon.



#5 slindborg

slindborg

    The Bishop of Stortford

  • PipPipPipPipPipPipPipPip
  • 22,602 posts
  • Gender:Not Telling
  • Location:.

Posted 02 May 2014 - 01:47 PM

https://drive.google...dit?usp=sharing

 

If a lovely mod could replace the link in the first post with this one I'd be most appreciative etc xxx

 

 



#6 techieboy

techieboy

    Supercharger of Doom

  • 22,914 posts
  • Gender:Male
  • Location:Bedford

Posted 02 May 2014 - 01:52 PM

Done. Though somebody else can have the kisses.

#7 slindborg

slindborg

    The Bishop of Stortford

  • PipPipPipPipPipPipPipPip
  • 22,602 posts
  • Gender:Not Telling
  • Location:.

Posted 02 May 2014 - 10:17 PM

Done. Though somebody else can have the kisses.

Cheers, spoil sport :P

#8 Andrew aka Stuwy

Andrew aka Stuwy

    Made In England

  • PipPipPipPipPipPipPip
  • 8,731 posts
  • Gender:Not Telling
  • Location:At Sea
  • Interests:most things are intersting

Posted 03 May 2014 - 07:06 AM

i'll take the kisses.... thumbsup

 

where do I collect them from?



#9 slindborg

slindborg

    The Bishop of Stortford

  • PipPipPipPipPipPipPipPip
  • 22,602 posts
  • Gender:Not Telling
  • Location:.

Posted 13 May 2014 - 08:45 PM

For reference: It is nearly impossible to solder onto original lambda sensor wires... They are raychem special stuff which is excellent quality but mostly crimp only. I was only able to get them to solder with some rude retro flux and nasty solder :lol: Use crimps, scotch locks, terminal blocks or any other non solder jointing method you like :) Yes scotch locks are poo but better than lashed up soldering.

#10 Zoobeef

Zoobeef

    Joes bedroom assistant.

  • PipPipPipPipPipPipPip
  • 11,103 posts
  • Gender:Male
  • Location:Retford/Bovington

Posted 13 May 2014 - 09:22 PM

I've still not even looked at your guide haha. The cheaters still on my living room floor.

#11 slindborg

slindborg

    The Bishop of Stortford

  • PipPipPipPipPipPipPipPip
  • 22,602 posts
  • Gender:Not Telling
  • Location:.

Posted 14 May 2014 - 08:02 AM

I think of the MK1 ones, only 10% are being used :lol:

 

Its hugely possible that I could send out a box with wires in it and no one would notice that it didnt notthing lmao



#12 Zoobeef

Zoobeef

    Joes bedroom assistant.

  • PipPipPipPipPipPipPip
  • 11,103 posts
  • Gender:Male
  • Location:Retford/Bovington

Posted 14 May 2014 - 02:09 PM

I'm waiting until I get a turbo back box. Then at the same time as fitting that I'll cut open the exhaust and remove both cats. I don't like doing things twice :)

#13 slindborg

slindborg

    The Bishop of Stortford

  • PipPipPipPipPipPipPipPip
  • 22,602 posts
  • Gender:Not Telling
  • Location:.

Posted 19 May 2014 - 08:49 PM

Just noticed that Google drive managed to eat the guide. Here is the link... Fingers crossed it works https://docs.google....sp=docslist_api

#14 slindborg

slindborg

    The Bishop of Stortford

  • PipPipPipPipPipPipPipPip
  • 22,602 posts
  • Gender:Not Telling
  • Location:.

Posted 19 December 2014 - 10:16 AM

Just a word of warning (which is covered by the disclaimer at the top of the guide :) )

 

The Turbo sensor side wiring IS different to the N/A.... I've never seen a turbo sensor +wiring so cannot confirm the wiring colours etc

 

Turbo http://www.speedster... Z20LET - 1.pdf

 

NA

http://www.speedster...e Z22SE - 2.pdf

 

On the car side of the harness, the 12V comes in at Pin 1 for the turbo and Pin 4 for the N/A

Switched ground is Pin 3 and 2 (turbo/na)

The other two I cant recall from the top of my head

 

Refer to here for possible colour combos etc.

http://www.lambdasen...n/mcolours1.htm

http://www.lambdasen...in/mcolours.htm

 

 

 

 

 



#15 Mopeytitan

Mopeytitan

    Billy No Mates

  • PipPipPipPipPip
  • 1,908 posts
  • Gender:Male
  • Location:Yeovil, Somerset
  • Interests:Cars, Motorbikes, well anything mechanical.
    My dogs (love my dogs).
    F1.

Posted 21 December 2015 - 03:42 PM

Trying to fit mine and can't seem to make any sense of the guide. How do you wore in the resistor? Has anyone got any pics of how its fitted? Cheers Al

#16 slindborg

slindborg

    The Bishop of Stortford

  • PipPipPipPipPipPipPipPip
  • 22,602 posts
  • Gender:Not Telling
  • Location:.

Posted 21 December 2015 - 03:49 PM

What, explicitly, are you having problems with?

Are you fitting it to a turbo or NA?

 

A rough piccy here might help.

 

https://drive.google...N1prdDRtcHNWUjA

 

And the guide here

https://drive.google...SW4tZVQxTFNRY0E



#17 Mopeytitan

Mopeytitan

    Billy No Mates

  • PipPipPipPipPip
  • 1,908 posts
  • Gender:Male
  • Location:Yeovil, Somerset
  • Interests:Cars, Motorbikes, well anything mechanical.
    My dogs (love my dogs).
    F1.

Posted 21 December 2015 - 03:56 PM

Fitting to an Na. We're both just confused about where you connect in the resistor

#18 slindborg

slindborg

    The Bishop of Stortford

  • PipPipPipPipPipPipPipPip
  • 22,602 posts
  • Gender:Not Telling
  • Location:.

Posted 21 December 2015 - 03:57 PM

between the two white wires



#19 Mopeytitan

Mopeytitan

    Billy No Mates

  • PipPipPipPipPip
  • 1,908 posts
  • Gender:Male
  • Location:Yeovil, Somerset
  • Interests:Cars, Motorbikes, well anything mechanical.
    My dogs (love my dogs).
    F1.

Posted 21 December 2015 - 03:58 PM

That pic helps a lot. Roughly what we were thinking but we weren't sure cheers slindy





Also tagged with one or more of these keywords: trumpet, puffin, lambda, cheater, slinderella

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users