Few Things For Sale
#1
Posted 15 July 2017 - 06:55 PM
They have the original springs (not sure on spring rates) that have been powder coated black to tidy them up and have a spare set of softer springs.
When I bought them they didn't have the adjuster tool so I borrowed one and got one knocked up by the guys at work.
Softer spring rates are:
Front - 300
Rear - 425
£800 + postage
2.5" stainless custom decat exhaust with carbon akrapovic exhaust tips. Was made by a welder friend of mine, we used the dimension of a turret back box and is fully repackage. It was first one he ever made so isn't perfect but it makes a really nice noise not too loud, goes silent when cruising (no annoying droning). Will include the lambda cheater to prevent EML. It was made using 2.5" mandrel bends and the original flang to fit a TMS manifold but should still a standard na manifold. Cost about £500 in parts alone.
Only issue is the tips stuck out further than standard but didn't really bother me enough to shorten them.
£300 open to offers
collection only due to size
F1 style wing mirrors
Painted red (ford pepper red) and have aluminium plates that bolt to the door were the plynths would be.
£50 + postage
Not sure if pics will work as I'm doing this on my phone.
May also have a few other bits up once I sort through the parts bins that are my spare rooms
#2
Posted 15 July 2017 - 06:56 PM
#3
Posted 15 July 2017 - 07:37 PM
The spares?Let me know if you wanna sell just the springs on there own. Need 4 for the wedding to hold flowers
#4
Posted 15 July 2017 - 07:38 PM
Edited by Mopeytitan, 15 July 2017 - 07:38 PM.
#5
Posted 15 July 2017 - 07:40 PM
#6
Posted 15 July 2017 - 07:46 PM
#7
Posted 15 July 2017 - 07:47 PM
#8
Posted 15 July 2017 - 07:48 PM
#9
Posted 15 July 2017 - 08:04 PM
#10
Posted 16 July 2017 - 08:48 AM
Erm I'm not really sure to be honest I can't remember what I paid for them. How about £20 and a bit of postage?How much you after for them? I could always post them back to the buyer after
#11
Posted 16 July 2017 - 08:56 PM
How old are the Nitrons, Al, and how many miles have they done?
Cheers, Jim
#12
Posted 16 July 2017 - 08:58 PM
I got them of Graeme Lambert, so not really sure to be honest. I've only done maybe 500 miles with them as haven't really used my car since fitting them.How old are the Nitrons, Al, and how many miles have they done? Cheers, Jim
#13
Posted 16 July 2017 - 09:04 PM
You've got a set of spare springs in the first pic! Ha I'm not joking I got 7 just need a few more Gotta have car parts at a wedding! Just has to be done
You could use your new wing as the top table ?
#14
Posted 16 July 2017 - 09:10 PM
#15
Posted 17 July 2017 - 09:57 AM
damn that front clam is sexy, who made the bottom part with the ducts where the fog lights usually sit?
#16
Posted 17 July 2017 - 10:19 AM
You buy the cut outs and Louvres desperately and cut holes in the clam and bond and fibreglass then in. I got them from FLD on here ::damn that front clam is sexy, who made the bottom part with the ducts where the fog lights usually sit?
#17
Posted 17 July 2017 - 10:26 AM
I got them of Graeme Lambert, so not really sure to be honest. I've only done maybe 500 miles with them as haven't really used my car since fitting them.How old are the Nitrons, Al, and how many miles have they done? Cheers, Jim
I did wonder if they were my old ones...
They were original on ChrisS1's car, so maybe he can advise on age etc?
#18
Posted 17 July 2017 - 10:28 AM
Yh maybe. They're not in bad nick at all and I've barely used them. And don't think you used them? So mileage is pretty much whatever ChrisS1 put on themI did wonder if they were my old ones... They were original on ChrisS1's car, so maybe he can advise on age etc?
I got them of Graeme Lambert, so not really sure to be honest. I've only done maybe 500 miles with them as haven't really used my car since fitting them.How old are the Nitrons, Al, and how many miles have they done? Cheers, Jim
#19
Posted 17 July 2017 - 10:52 AM
They've done a max of 20k I'd say.
No problems with them when I sold the car to G
#20
Posted 17 July 2017 - 10:53 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users