7 replies to this topic

[smiley]

I would really like to be able to flush my abs, and afaik it's tech2 only that can do this.
The oem unit is 4k isch i believe, so not really an option.

 

I have been eyeballing at these tech2 clones on ebay, but reports on them vary a lot.

tool
http://cgi.ebay.co.u...em=263541046546
card
http://cgi.ebay.co.u...em=283446927200

 

Has anybody here tried the tech2 clone on his vx and can tell me if it's worth the money?

 

[FLD]

If you're on 4 channel its the lotus 'yellow' service lead you need.
Can you not flush the 2ch ABS with an op-com?

[smiley]

afaik opcom cannot flush.
I am on the lotus abs, but still have the 2 channel lying around, and happy to swap for this job.
 

[2-20]

Can Opcom allow the flushing with the OEM module ??
Thanks

[2-20]

Ok... By more careful reading it seems it's not possible...

[Exmantaa]

afaik opcom cannot flush.
I am on the lotus abs, but still have the 2 channel lying around, and happy to swap for this job.
 

 

Some time ago we made a "custom ABS trigger/flusher" from an old ABS module, but it's buried somewhere in the shed due to a faulty transistor. Will dig that up for you.

[smiley]

I know. Reminded you guys a few times on it, but gave up.

[FLD]

LOL!
Is it possible to jump some wires in the loom to energise the pump? I assume this is all that's needed to flush it.