41 replies to this topic

[Denis67]

1. Stefan (Stefan_A), Sweden - dash plates / gloss 2. Maurice (Holland) - dash plates / matt 3. Filip ( ? ), Belgium - dash plates / ? 4. SlimVince (Sweden) - dash plates / matt 5. dimd00d (Bulgaria) - dash plates/gloss 6. Matte (Sweden) - Whole kit / gloss, if possible. 7.Stevie (Germany) - Whole kit / matt 8.Particle (Germany) - Whole kit / matt 9. Dutchmike (Holland) - dash plates LHD / matt 10. PaulK (UK) - door cards, handle guards and RHD dash plates - all matt please 11. Road-Runner (Switzerland) - whole set, LHD / matt please 12. Rennpferd (Germany) - doorcards + handle guards / matt please 13. JimmyJamJeruaslem (UK) Handle Guards / Matt 14. Martin (Holland) - door cards, handle guards / gloss 15. JawZ (Sweden) - Handle guards / matt 16. Manima (France) - Dash plates LHD / gloss 17. Denis67 (France) - door cards, handle guards / gloss 18. 19. 20.

[Stevie]

Hi! Is there something going on, regarding this topic??? I ordered the whole set in matt, but get no response from Stefan or Barry! TIA Stevie

[Stefan_A]

Hi Stevie, that's strange - I've sent a list with contact details (that I've received from you all via PM) to Carbontech and the first production list has been sent out to number 1-11 on the list (that was the first batch). Please check your spam filter. I've also replied to your e-mail directly. Kind regards, Stefan

[Stefan_A]

Ok, times up and the final list looks like this; 1. Stefan (Stefan_A), Sweden - dash plates / gloss 2. Maurice (Holland) - dash plates / matt 3. Filip ( ? ), Belgium - dash plates / ? 4. SlimVince (Sweden) - dash plates / matt 5. dimd00d (Bulgaria) - dash plates/gloss 6. Matte (Sweden) - Whole kit / gloss, if possible. 7.Stevie (Germany) - Whole kit / matt 8.Particle (Germany) - Whole kit / matt 9. Dutchmike (Holland) - dash plates LHD / matt 10. PaulK (UK) - door cards, handle guards and RHD dash plates - all matt please 11. Road-Runner (Switzerland) - whole set, LHD / matt please 12. Rennpferd (Germany) - doorcards + handle guards / matt please 13. JimmyJamJeruaslem (UK) Handle Guards / Matt 14. Martin (Holland) - door cards, handle guards / gloss 15. JawZ (Sweden) - Handle guards / matt 16. Manima (France) - Dash plates LHD / gloss 17. Denis67 (France) - door cards, handle guards / gloss I've recieved contact details from you all, and they've been forwarded to Carbontech. If you haven't already, you should soon receive a production list from them. I expect to get the first set of LHD panel bits this week to try out, will post the result and pics as well.

[Manima]

I received an answer from Carbontech this morning. It's ok for me. I'm waiting for updates for payment.

[DutchMike]

Has anybody had a follow up email from Carbontech already? Just curious....

[Stefan_A]

Hi all, got the package today with the dash panel bits. Well, sort of at least - when I went to pick it up at my local post office they had a computer breakdown so I couldn't get the package from them Hope they have sorted it until the weekend, away on business now for the rest of the week. Will post pictures etc once I get it, if everything fits as it should the rest of the kits should get going. Cheers, Stefan

[Manima]

Hello Stefan, We're waiting for your news.

Edited by Manima, 08 April 2008 - 11:44 AM.

[DutchMike]

Has anybody had a follow up email from Carbontech already? Just curious....

I've got an email from Carbontec
It is the mail I got 21 March, and everybody who ordered goods had this mail if correct.
If you didn't receive any mail, please check your spam box!

Let's wait for the experiences of Stefan, hope to here something soon

[Stefan_A]

Well, got the package out of my postal office tonight - they still had computer issues but I got my parcel

Panel bits was very well packaged, although the overnight shipping didn't worked out very well (sent from Carbontech last Wednesday, and according to tracking info left UK on Friday morning). Finish on the panel bits was as good as on the door cards and handle guards. I got all mine in gloss finish, so I have no clue about how the matt ones look like in real life. I got some extra tape but I didn't use it. However, I use all of the tape that was fitted to the panel bits themself. Time will tell if that extra tape is needed. Bits fit well, both around light buttons as well as around the radio. No modifications needed (one improvement done is that Carbontech has removed one of the stiffeners that used to be on early panel bits. Apparently our cars are different, on some cars the screws for the heater collided with that stiffener. I used a heat gun to make sure that the dash board was dry. Fitting dash panels was easy (removing the old panels wasn't). Just make sure to mount the radio first to help with alignment of the new panel.

Took some crappy photos tonight after fitting the new panels (batteries not charged in my other camera...).


Door cards and handle guards


Small bit around light switches


Longer bit around the radio

I'll post some more pics on my homepage the coming weekend. Will be away now until weekend on business matters.

[Manima]

Great!!! Thanks for pictures and feedback. I'm very impatient.

[mandarinvx]

A picture of my matt card and handle guard fitted:



Barry also has the front V in production

[Stefan_A]

Two more pics of gloss parts fitted, just waiting for updates on the center console/gear shroud now to finish of the "bling" things


Panel fitted


Door card and handle guard

[Stefan_A]

Got a mail from Carbontech reagarding the handle guards, price quoted for these got slightly wrong. Should be as in the first group buy for handle guards >Link< which was £70 + VAT + p&p. In the prices I got at the first place, and posted in this thread, I got the price £70 for handle guards. The correct price for handle guards would be £82.25 (incl. VAT this time) +p&p. Door cards and panel bits was correct from the start, so no change to those parts. Those of you affected will get a mail from Carbontech on this as well. Sorry for the confusion.

Edited by Stefan_A, 15 April 2008 - 04:23 AM.

[Stevie]

Two more pics of gloss parts fitted, just waiting for updates on the center console/gear shroud now to finish of the "bling" things

Regarding the gear shroud....is there also a group buy in sight??

[Code Monkey]

Barry also has the front V in production

Vee looks like this once fitted to the car



Will sort some better pictures this weekend.

[slimvince]

Anybody got delivery yet? Last time I heard anything they still said they were waiting for Stefan's trial fitting...

[paulk]

Hey folks Anyone know when deliveries will start - Going off to drive round europe mid-may and really want them for poncing outside the casino in Monte Carlo regards to all Paul

[Manima]

I received a second mail and production is coming slowly but surely. good!

[Manima]

Has someone got any news?... Who has got delivery something?...