29 replies to this topic

[Guy182]

doesnt make a difference.

[slindborg]

doesnt make a difference.

it should.... makes hell of a difference when changing a 3.94fd to 4.18fd in a nova lol

[Guy182]

see type 116

Edited by Guy182, 24 March 2008 - 05:15 PM.

[danger7]

in the world of 1/4 mile times there is a Speedster Turbo that's quite quick. 9.969 secs - that I see is the same as an Ultima and the owner oh he's the guy that does all your remaps at Courtney's - Heir Klasen. There is a youtube vid if i knew how to link. Cheers Ian

[slindborg]

see type 116

did you count the teeth on the FD gears? lol There should be atleast a viewable difference (and different angle accel lines)

[Guy182]

did you count the teeth on the FD gears? lol There should be atleast a viewable difference (and different angle accel lines)

i didnt do the gearbox work..

Edited by Guy182, 24 March 2008 - 05:58 PM.

[slindborg]

did you count the teeth on the FD gears? lol There should be atleast a viewable difference (and different angle accel lines)

i didnt do the gearbox work..

I'd seriously want to see what came out and what went in...... to me that looks like nothing has changed in that box. How long did it take them to strip the shafts down and rebuild them?

[flashash123]

I'm guessing they would do about a 14.6

I did 14.21 with print outs in my standard n/a (apart from an induction kit) at santa pod a few months ago. im of there again on may the 4th if anyone is up for it???

[reg_the_geza]

I did 14.21 with print outs in my standard n/a (apart from an induction kit) at santa pod a few months ago. im of there again on may the 4th if anyone is up for it???

thats a good time, didnt think a standard na could do it that quick

[GunnerGibson]

my williams could run 14s all day.... then i saw a drag car do it in 6 seconds or something daft and thought..at least i can corner.. Drag strips are for yanks, however it is always a good indictaion of engine mods etc