76 replies to this topic

[chris_uk]

Going to Courtenays on monday for some bits fitting and a remap.. whats the BHP / Torque going to be ? Closest person wins a slug from the garden. Mods K&N Cone Air Filter Blower Comp Cams GM Racing Valves 0,5mm Oversized Supertech Dual Valve Springs VXR Injectors Smaller 2.9" Supercharger Pulley Ported Exhaust Ports Wiesco Pistons 8.9:1 Comp 0.20 Oversized Eagle Rods Tullet 4-1 Equal Length Preliminaries Manifold Piper 2.5" Exhaust with 200cell cat i got 270bhp @ 7000rpm with K&N Cone Air Filter Stage 1 NA Comp Cams VXT Injectors Tullet 4-1 Equal Length Preliminaries Manifold Piper 2.5" Exhaust with 200cell cat

[VXT Tim]

294bhp 252lbft

[vocky]

280.1

[rsg]

Hopefully lots as that will be the spec of mine by the end of the year. My guess - 305 What blower cams are the Chris? Comp cams or Piper regrinds?

Edited by rsg, 07 April 2011 - 08:33 PM.

[chris_uk]

they are the comp cams.

[haggi961]

289.6 bhp 246 lbft

[turbobob]

292 bhp

[EASTYORKSVX]

289bhp

Edited by EASTYORKSVX, 07 April 2011 - 10:09 PM.

[Winstar]

301.6

[The Batman]

How cold was it in Norfolk today?

[p4cks]

Torque is where it's at. I'll bet 281lb-ft

[rob999]

271bhp

[higgins]

270.01 bhp

[Tail slide]

Hi Chris, Jon mentioned yours - almost identical to the spec sheet for mine which has been sitting there pining for a while, waiting for the rods & pistons from the U.S.! The blower cams have already proved a big step up on other SC's. Would be good to break the 300 mark but not sure with our 2.5" exhausts, but on other engines found a slightly smaller exhaust plumps up mid-range torque compared with 3".... So I'll place my bet on 305bhp and 275lbft. Paul

[The Batman]

What did ya get then? If you broke the 300 there will be alot of 3" systems for sale

[Mangham54]

What did ya get then? If you broke the 300 there will be alot of 3" systems for sale

Nowt... It isn't "Monday" yet.

[smiley]

280

[chris_uk]

i cant see it breaking 300, but it would be very nice if it did.. maybe if i had a de-cat then it might be possible. roll on monday!

[M3 BFG]

Might see you Monday - I'm leaving the VX with them in the morning. That's a long way from Leeds......................................... Simon

[Exmantaa]

i cant see it breaking 300, but it would be very nice if it did..

maybe if i had a de-cat then it might be possible.

roll on monday!

With your ported exh. ports, that header and the cams+springs I'm disappointed if this is not very close to 300HP, if not over... (>7500rpms )
(But the 8,9 CR Wiseco's will cost you some...)