Did someone take a seat on your exhaust backbox heatshield mopey?
Posted 21 April 2017 - 08:05 PM
Did someone take a seat on your exhaust backbox heatshield mopey?
Posted 21 April 2017 - 08:15 PM
No I beat the crap out of it It was in the way. I'll be makin all new ones anyway because I had cut it when I put the cutouts in the rear clamDid someone take a seat on your exhaust backbox heatshield mopey?
Posted 21 April 2017 - 08:17 PM
Posted 21 April 2017 - 08:17 PM
Posted 21 April 2017 - 08:19 PM
Posted 21 April 2017 - 08:21 PM
Posted 21 April 2017 - 08:22 PM
Posted 21 April 2017 - 08:36 PM
A new exige (lookalike) and it's also a V6 with big turbopower........Man, i would also like to have one
Really cool to look at . Especiallly when giving it full throttle.....Red glowing turbo .......... think i'm in love ..........
Posted 21 April 2017 - 08:43 PM
Ooooh, shiny engine!
Now what is the glass panel we are looking through?
Posted 21 April 2017 - 08:43 PM
Posted 21 April 2017 - 08:43 PM
Posted 21 April 2017 - 08:44 PM
Posted 21 April 2017 - 09:34 PM
Nice!
I think the blue and yellow colour scheme works quite well too.
Posted 22 April 2017 - 06:56 AM
What's cool about it aswell is once the big turbo is on you will be able to see it in the rear view mirror
Posted 22 April 2017 - 07:58 AM
Mount the turbo on the dashboard for the full orange glow effect, it would also make the best possible cabin heater and keep the passengers entertained.
Edited by Nev, 22 April 2017 - 07:59 AM.
Posted 29 April 2017 - 05:55 AM
Talk about a tight fit,I've not got many decent photos and still haven't got my Exige subframe but here's one while I was working on it...
Not sure if the pic worked as I'm on my phone. I will be updating my project thread at some point so it will all be in there :thumbs up:
Posted 29 April 2017 - 07:13 AM
Such a remarkable bit of work this, it still makes me double take.
Edited by Nev, 29 April 2017 - 07:26 AM.
Posted 29 April 2017 - 07:36 AM
Talk about a tight fit, Are you sticking with rubber engine/box mount bushes or going with polyurethane? Could there be a picture of the front or rear engine mount if possible please?
eh? Can't get PU side mounts, you can only get PU infill mounts for the front and rear, i assume the rear will be changing given that it's connected to the subframe
Posted 29 April 2017 - 07:40 AM
might be worth fitting/welding some metal inserts/sleeves into the subframe extension mounting holes, to stop them from being crushed when you fully tighten them.
Engine install is looking good
Posted 29 April 2017 - 08:02 AM
might be worth fitting/welding some metal inserts/sleeves into the subframe extension mounting holes, to stop them from being crushed when you fully tighten them.
Engine install is looking good
I think he is getting an Exige v6 rear subframe its only temporary .
watching with intrest lots of work to do good luck with it all
0 members, 2 guests, 0 anonymous users