171 replies to this topic

[CHILL Gone DUTCH]

Everybody is on this 15% i haven't 100% confirmed this, I have on the 10% so if we get over 10  i will confirm for you all about this .

If Lee can get confirmation and secret word you might be able to qualify and help others with extra discount

[leevx2.2]

Matt if you ask Ian and  say Lee has got 10 for the anti roll bar group buy i think he will give you minimum 10%

[leevx2.2]

It will be. It's broken.

Not where we get an MOT done Matt lol

[siztenboots]

It will be. It's broken.

the cornering force one , thats bad luck

[leevx2.2]

Right just spoke to Ian he said he will ring me back in a little to confirm the 15% but you will have to pay postage or pick up, multiple deliveries to one address is fine . But to get this deal all people will have to ring up and pay before they are dispatched  so just hang on a little i am on it ;-)

[CHILL Gone DUTCH]

1. Chill. - ready to pay 2. The batman 3. Captain Vimes 4. Acidpopstar 5. FLD (ready to pay now if needed) 6. 2GOOD 7. Techie - ready to pay and collect ASAP 8. George 9. Pigeon 10. Jason Looks like we have 10 for 15% Can everyone confirm they are ready to pay next to there names so there won't be any hold ups when/if we get confirmation please

[techieboy]

Not where we get an MOT done Matt lol

Scarily. That might be true.    

the cornering force one , thats bad luck

Yup. Corroded at a weld (presumably where the powdercoating has cracked) and now split around half it's circumference like some of the others. I was going to bin it anyway as others have had the same, but then had a good look at it when it was up on a ramp at an exhaust place on Monday and that made my mind up.

[techieboy]

Have cancelled Monday's MOT so I'm back in for sure even if it means not being able to fit it this weekend. They're only 20 minutes away from me, if anyone wants me to collect theirs. Have been in Chester this week which would have been handy for bringing up three of them, by the look of the list. Shaping up to be there again week after next, if that helps anyone?

[alkvalseth]

Why is this ARB better than the £140 Elise-shop arb, which is 2.25x stiffer than the std one? Is the 1" from Eliseparts much better quality, or is 7/8inch diameter not stiff enough? Both are adjustable.

[CHILL Gone DUTCH]

Why is this ARB better than the £140 Elise-shop arb, which is 2.25x stiffer than the std one? Is the 1" from Eliseparts much better quality, or is 7/8inch diameter not stiff enough? Both are adjustable.

I don't know the answer to this All I know is I want to upgrade so why not get the best you can afford But at least one person on the list will be putting a 1" on for a 7/8ths one

[leevx2.2]

Right all confirmed 10 at 15% but still £8 delivery which is still better than 10% they will send up to 5 to the same address if people want to pick up even better ,but everybody needs to pay  before they will send out or you can pick up  .just say its the group buy .

[leevx2.2]

sorry 

 

Edited by leevx2.2, 05 June 2015 - 02:39 PM.

[leevx2.2]

lol

Edited by leevx2.2, 05 June 2015 - 02:38 PM.

[leevx2.2]

Why is this ARB better than the £140 Elise-shop arb, which is 2.25x stiffer than the std one? Is the 1" from Eliseparts much better quality, or is 7/8inch diameter not stiff enough? Both are adjustable.

Apparently the 1inch bar is stronger on the minimum setting than the  7/8 on full hard .

[The Batman]

I so wanted a better code name... Like Big-floppy-donkey-dick

[techieboy]

Why is this ARB better than the £140 Elise-shop arb, which is 2.25x stiffer than the std one? Is the 1" from Eliseparts much better quality, or is 7/8inch diameter not stiff enough? Both are adjustable.

Apparently the 1inch bar is stronger on the minimum setting than the  7/8

  

Why is this ARB better than the £140 Elise-shop arb, which is 2.25x stiffer than the std one? Is the 1" from Eliseparts much better quality, or is 7/8inch diameter not stiff enough? Both are adjustable.

Apparently the 1inch bar is stronger on the minimum setting than the  7/8 on full hard .

 

Why is this ARB better than the £140 Elise-shop arb, which is 2.25x stiffer than the std one? Is the 1" from Eliseparts much better quality, or is 7/8inch diameter not stiff enough? Both are adjustable.

Apparently the 1inch bar is stronger on the minimum setting than the  7/8 on full hard .

Does that make it 3x stronger?

[The Batman]

Why is this ARB better than the £140 Elise-shop arb, which is 2.25x stiffer than the std one? Is the 1" from Eliseparts much better quality, or is 7/8inch diameter not stiff enough? Both are adjustable.

Apparently the 1inch bar is stronger on the minimum setting than the  7/8 on full hard .

Who wants 7/8s of an inch fully hard....

Edited by The Batman, 05 June 2015 - 02:39 PM.

[leevx2.2]

Bloody computer 

[leevx2.2]

Ok new code name is please give Lee lots of discount  lol how did i get involved i don't even need one lol.

[FLD]

Have cancelled Monday's MOT so I'm back in for sure even if it means not being able to fit it this weekend. They're only 20 minutes away from me, if anyone wants me to collect theirs. Have been in Chester this week which would have been handy for bringing up three of them, by the look of the list. Shaping up to be there again week after next, if that helps anyone?

 

 

Top Man!

 

If you want your CF bar re-welded bring it up too.