103 replies to this topic

[CHILL Gone DUTCH]

Ways around everything 👍

[ufods]

2.95 Pulley is now in the Car. Going to be more torque in lower revs.

It is anodised afterwards to harden the pulley

[ufods]

WI is in its way in the car. But much more work is needed to get it fit.

Edited by ufods, 13 April 2017 - 02:34 AM.

[ufods]

[CHILL Gone DUTCH]

nice work Christian keep up the good work 

[haggi961]

Like the water injection kit, where will you be fitting it?

[ufods]

It will fit in the right sill. Tight fit 😃

[haggi961]

It will fit in the right sill. Tight fit 😃

Perfect and this is what I'm trying to achieve also. I would be interested if you had pictures of this fitted and how does your bracket work for bolting on? Is it a 4 quart tank?

[ufods]

I will post pics when installed. It will be taped and fixed with screws. Time will tell if this will work. It is 3 quart, 2.9 liters. Enough for road, but not to track it. I also beliebe that it will not be possible to use 100% of the content. So maybe only 2 liters before sucking air in corners. I will install a little tank ( 0.25l ) behind the seat. This one i can easily change with a further 3 quart tank. So 5 liters to use which should be enough

[haggi961]

I can get a 5 litre tank inside the sill but it has to be a certain size and I'm struggling to find a tank that can be bought off the shelf

[haggi961]

Did you make that bracket? If not can they be bought as I think this would work for me also.

[ufods]

...i build the bracket myself. Consisting from 2 "L" alloy panels which are glued/screwed together. Even with my solution it is possible to use a bigger tank. The tanks i used are from usplastics who did them up to 8 quarts with the same basic size. Only the heigh differs.

[ufods]

@ haggi961 I hope that helps! There are different ways to install the WI kit. That is only my solution. I will post some more pics later.

[ufods]

Did some mini work today. New basemap, wideband calibrating.

[ufods]

Now alive!!! https://youtu.be/nc3SSuiWSZY

[ufods]

View from under the car to the right sill:



View from under the car up to the supercharger:



View from inside the car through a hole behind the seats:

[CHILL Gone DUTCH]

Just about started Thumbs up

[ufods]

Now with 3,5 inch intake.

[ufods]

Little steps forward. Some more air for the 19 rows oil cooler.




Decided to leave the Snowperformance route and change to Aquamist. But will take some time until it will be available

[chris_uk]

the position of them jets in the top, are they far enough away from the wall of the manifold? because otherwise they are just going to spray on the wall of it and it wont be as effective. its why i put mine in the sides, largest area for the spray pattern.